Dixon 12881-1104 manual Grass Height & Cutting Suggestions

Page 31

OPERATION INSTRUCTIONS

GRASS HEIGHT & CUTTING SUGGESTIONS:

Do not attempt to cut grass when it is wet.

If the grass is tall, place the mower deck cut height lever in the top or second notch. “Initially” overlap cutting swaths instead of a full swath with each pass. Some applications may require a second cutting.

Keep the underside of the mower deck clean.

Maintain sharp blades throughout the cutting season.

As a rule of thumb, never cut off more than 1/3 of the total grass blade length. Correct mowing height can reduce weeds and disease by 50% to 80%.

The following grass cut heights are based on adequate moisture conditions and normal thatch build-up in a healthy lawn. Some locations and applications may require slightly different cut heights. If in doubt, consult your local lawn professional for assistance.

Grass Types

Best Cut Heights

Bermudagrass

1 - 2”

Bluegrass

2 - 3”

Buffalograss

11/2 -3”

Ryegrass

2 - 3”

Tall Fescue

3-31/2

Zoysiagrass

1 - 3”

31

Image 31
Contents ZTR Important Read Carefully Table of Contents Safety Safety Alert Symbol General Operation General Operation General Operation Slope Operation Slope Operation Do not Fire Hazards Fire Hazards Children Service Kodiak, Grizzly & SilverTip Mowers SilverTip ZTR 60 SpecificationsControl Levers ControlsMower Deck CUT Height Lift Lever Parking BrakeSeat Throttle Control Lever Mower Blade SwitchIgnition Switch Choke Control LeverControls Before Operating Mower Operation InstructionsTo Free Wheel Machine Unlock Transmission Towing Trailers and Other AttachmentsStarting Instructions Stopping Instructions Mowing InstructionsTesting of Safety Interlock Systems Interlock Switch Test Mowing with a Mulching Attachment Mowing with a Mulching Attachment Side Discharge of the Clippings Grass Height & Cutting Suggestions Springs To Lift SeatTires Maintenance Schedule Care and MaintenanceMower Blades OFF Season Battery Storage BatteryEngine Engine LubricationBelt Tension BeltsChanging the Engine OIL OIL Filters OIL FillRecommended Fluid Hydrostatic Transmission Fluid Filter ServiceHydrostat Fluid Maintenance Procedure Hydrostatic Pumps Hydrostat Drive Belt Replacement ProcedureParking Brake Adjustment Headlight Adjustment To adjust neutral Steering Control AdjustmentsTo adjust steering control levers Steering Control AdjustmentsTo adjust In position of the steering controls Leveling the Deck Electrical Systems Cleaning the MowerWarranty PARTS/SERVICEEngine WON’T Turn Over TroubleshootingEngine Backfires SilverTip ZTR Standard Service Parts ListAir and Oil Filter Page Page Date OIL Changed Date Engine Tuned OWNER’S InformationSilverTip