Dimension One Spas Aquatic Fitness System manual

Aquatic Fitness System

2002 Owner’s Manual

Pump 1 Button: Press the button once to turn on Pump 1 to Low Speed. A second press will turn it to High Speed. A third press will turn the pump off. A built-in timer will shut the pump off after 20 minutes of operation unless done so manually. The Pump 1 Arrow Indicator will appear on the display while the pump is running.

If the filter icon appears, a filtration cycle has begun and you will not be able to turn the pump off.

Pump 2 Button: Press the key once to turn on Pump 2. A second press will turn it off. A built-in timer will shut the pump off after 20 minutes of operation unless done so manually. The Pump 2 Arrow Indicator will appear on the display while the pump is running.

Pump 3 Button: Press the button once to turn on Pump 3. A second press will turn it off. A built-in timer will shut the pump off after 20 minutes of operation unless done so manually. The Pump 3 Arrow Indicator will appear on the display while the pump is running.

Light Button: Press this button to turn on the Aquatic Fitness System light; a second press will turn the light off. The Light Arrow Indicator will appear while the light is on. Some Aquatic Fitness System models have two lights controlled by this switch.

Temperature Set Button: Press the Up Arrow button to increase the desired temperature. Press the down arrow key to decrease the temperature. The temperature can be adjusted in 1°F increments from 59°F to 104°F (5°C to 40°). The new setting will remain on the display for 5 seconds as a confirmation.

Set Point Arrow Indicator: While you are adjusting the temperature, the Set Point Arrow Indicator will appear to let you know this is the desired temperature and not the actual temperature. After 5 seconds the display will return to the current temperature reading. When the temperature drops to 1°F below the set temperature, the heater will turn on until the temperature is 1°F above the set temperature.

The heater icon will appear while the heater is on and flash when there is a call for heat and the heater has not yet been activated.

Flashing Warning Lights: Three (3) Flashing Warning Lights will appear when problems have been identified. Refer to the Troubleshooting Guide for more information on what they mean and how to resolve the problem

Programming the Filtration Cycle

The filter cycle occurs twice a day (every 12 hours) and the duration is user programmable. Press and hold the light Key for approximately 5 seconds to display the current duration. Use the Temperature Set Keys to either decrease or increase the duration. The duration can be set from “0” (no filtration) to”12” (24 hours a day). Press the Light Key to save the new setting and to start the filtration cycle. The Filter Indicator will illuminate on the display under the filter icon during the active cycle.

To prevent overheating of the water, the filtration cycle will be suspended any time the temperature reaches

2°F above the set temperature. If the water cools to 1°F above the set temperature while the filtration cycle is still active (filter indicator flashing), the filtration cycle will reactivate. The filtration cycle will be suspended if the user enters the water and activates a pump motor manually. This is to prevent unnecessary operation of the ozonator. The cycle will be suspended for 40 minutes beyond the last manual activation of any accessory. The filter indicator will flash on the display while the filter cycle is suspended.

Aquatic Fitness System specifications

Dimension One Spas has established itself as a pioneer in the world of aquatic fitness systems, with the Aquatic Fitness System (AFS) standing out as a remarkable innovation for both fitness enthusiasts and wellness seekers. This system integrates the benefits of hydrotherapy, exercise, and relaxation, making it an attractive option for those looking to enhance their overall health and fitness.

One of the main features of the AFS is its dual-purpose design. It combines the functionalities of a hot tub and a swim spa, allowing users to engage in various aquatic exercises while enjoying the therapeutic benefits of warm water. The spacious interior provides ample room for swimming, jogging, and resistance training, making it an ideal solution for families and individuals alike.

The Aquatic Fitness System is equipped with advanced technology, including a powerful swim jet system that offers adjustable current speeds. Users can customize their workout intensity, making it suitable for everyone from beginners to seasoned athletes. This feature not only enhances cardiovascular fitness but also helps in building strength and endurance.

Another standout characteristic of the AFS is its energy-efficient design. Built with high-quality insulation and advanced water circulation systems, it ensures reduced energy costs while providing optimal heating and water quality. This makes the system not just environmentally friendly but also economical for everyday use.

The integrated hydrotherapy features further elevate the AFS experience. Users can enjoy massage jets strategically placed throughout the spa area, targeting sore muscles and providing relaxation after a vigorous workout. This combination of exercise and therapy is conducive to overall wellness, aiding in recovery and stress relief.

Safety is also paramount in the design of the Aquatic Fitness System. Non-slip surfaces, ergonomic seating, and easy-to-use controls ensure that users can exercise confidently and comfortably, reducing the risk of accidents.

In conclusion, Dimension One Spas Aquatic Fitness System stands out not just as a fitness platform, but as a holistic wellness solution. With its versatile design, powerful technology, energy efficiency, therapeutic features, and focus on safety, the AFS can transform any backyard into a personal health oasis, making it an invaluable addition for those committed to improving their fitness and well-being.