Desa 098031J Maintenance and Storage of Chain SAW, Kickback Safety Devices On This Saw

Page 3

OWNER’S MANUAL

SAFETY

WARNINGS

KICKBACK

WARNING: Kickback may oc- cur when the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut. Tip contact in some cases may cause a lightning fast reverse re- action, kicking the guide bar up and back towards the operator. Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back towards the operator. Either of these re- actions may cause you to lose control of the saw which could result in serious injury to user.

Kickback Safety Devices On This Saw

This saw has a low-kickback chain and reduced kickback guide bar. Both items reduce the chance of kickback. Kickback can still occur with this saw.

Properly install front hand guard. This item can reduce injuries from kickback. Follow assembly instructions on page 6. Do not remove front hand guard. Do not replace front hand guard with substitute.

The following steps will reduce the risk of kickback.

Use both hands to grip saw while saw is running. Use firm grip. Thumbs and fingers must wrap around saw handles.

Keep all safety items in place on saw. Make sure they work properly.

Do not overreach or cut above shoulder height.

Keep solid footing and balance at all times

Stand slightly to left side of saw. This keeps your body from being in direct line with chain.

Do not let guide bar nose touch anything when chain is moving (see Figure 1).

Direction

Do Not Let

Guide Bar

Touch Here

90° Quadrant

Figure 1 - Kickback Hazard Example: Do Not Let Nose of Guide Bar Touch Object While Chain is Moving

Never try cutting through two logs at same time. Only cut one log at a time.

Do not bury guide bar nose or try plunge cut (boring into wood using guide bar nose).

Watch for shifting of wood or other forces that may pinch chain.

Use extreme caution when reentering a previous cut.

Use low-kickback chain and guide bar supplied with this chain saw. Only re- place these parts with chains and guide bars listed in this manual.

Never use dull or loose chain. Keep chain sharp with proper tension.

Do not hand sharpen chain on automatic chain sharpening (Fast Sharp) models.

Saw Maintenance and Kickback Safety

Follow maintenance instructions in this manual. Proper cleaning of saw and chain and guide bar maintenance can reduce chances of kickback. Inspect and maintain saw after each use. This will increase the service life of your saw. Note: Even with proper sharpening, risk of kickback can increase with each sharpening.

MAINTENANCE AND STORAGE OF CHAIN SAW

1.Unplug chain saw from power source

when not in use

before moving from one place to an- other

before servicing

before changing accessories or at- tachments, such as saw chain and guard

2.Inspect chain saw before and after each use. Check saw closely if guard or other part has been damaged. Check for any damage that may affect operator safety or operation of saw. Check for align- ment or binding of moving parts. Check for broken or damaged parts. Do not use chain saw if damage affects safety or operation. Have damage repaired by authorized service center.

3.Maintain chain saw with care.

Never expose saw to rain.

Keep chain sharp, clean, and lubri- cated for better and safer performance.

Follow steps outlined in this manual to sharpen chain.

Keep handles dry, clean, and free of oil and grease.

Keep all screws and nuts tight.

Inspect power cord often. If dam- aged, have repaired by authorized service center.

Never carry chain saw by power cord.

Never yank power cord to unplug it.

Keep power cord from heat, oil, and sharp edges.

Inspect extension cords often and replace if damaged.

4.When servicing, use only identical re- placement parts.

5.When not in use, always store chain saw

in a high or locked place, out of children’s reach

in a dry place

in a carrying case or with scabbard over guide bar

Keep this manual for reference. It is your guide to safe and proper operation of this chain saw.

107990

3

For more information, visit www.desatech.com

Image 3
Contents Electric Chain SAW Safety Before Operating SAWWhile Operating SAW Kickback Maintenance and Storage of Chain SAWKickback Safety Devices On This Saw Saw Maintenance and Kickback SafetyChain SAW Names and Terms Unpacking ProductWill not cut AssemblyOn saw backwards. If chain is Backwards, saw will vibrate badlyFilling OIL Tank SAW Chain Tension AdjustmentCutting with the Chain SAW Operating Chain SAWExtension Cords Oiling ChainBefore Felling a Tree Felling Procedure Felling NotchFelling a Tree Cutting Down a TreeLog Supported On One End Limbing a TreeBucking a LOG Entire Length Of Log On GroundLog Supported On Both Ends Trimming a Tree PruningCare of Guide BAR Cleaning and MaintenanceCleaning SAW Body Normal Guide Bar MaintenanceSharpening SAW Chain Sharpening CuttersItems Needed to Sharpen Chain Replacing SAW Chain Technical ServiceService Publications StorageObserved Fault Possible Cause Remedy TroubleshootingIllustrated Parts Breakdown LNT-2Is assembled with depending on your above to determine Description Parts ListEL-7 QTY Parts Dealers Authorized Service CentersIowa IA North Dakota ND Pole SAW, 104316-04 General Replacement Parts and AccessoriesPart Number Description EL-7, 098031J, 099039J Pole SAW, 106890-01 100089-05Repair Service Warranty ServiceNON-WARRANTY Service

107714-02, 100089-06, 099039J, 099178H, 100089-04 specifications

Desa 100089-05, 100089-08, 098031J, 100089-04, and 099178H represent a series of advanced heating technologies utilized primarily in residential and commercial applications. Each model is designed to effectively provide warmth while optimizing energy usage and enhancing user comfort.

The Desa 100089-05 is characterized by its energy-efficient design, which allows for significant reductions in heating costs. This model features a powerful heater core that quickly generates heat, ensuring spaces are efficiently warmed in a short amount of time. An intuitive control system allows users to set desired temperatures easily, providing a perfect balance between comfort and energy conservation.

Moving on to the Desa 100089-08, this model integrates advanced safety features, such as automatic shut-off mechanisms and overheat protection. These innovations are essential for peace of mind, especially in homes with children or pets. The 100089-08 also boasts a sleek design, making it an aesthetically pleasing addition to any room. Its quiet operation is another advantage, enabling it to function without disrupting daily activities or sleep.

The Desa 098031J offers versatility, suitable for both indoor and outdoor use. It leverages advanced radiant heating technology for an even distribution of warmth, making it ideal for patios or garages. Users appreciate its portability, allowing for easy transfer from one location to another. This model also features adjustable settings, accommodating various heating needs, from a cozy evening outdoors to a quick warm-up in a chilly garage.

Desa 100089-04 embraces efficiency through its innovative insulation technologies. This model minimizes heat loss and maximizes performance, allowing for longer operating times without the need for frequent refueling. It also includes programmable timer functions, enabling users to schedule heating according to their lifestyle, thus enhancing convenience and energy savings.

Lastly, the Desa 099178H stands out for its eco-friendly design. With a focus on renewable energy sources, this model incorporates solar heating technology, targeting a reduction in fossil fuel reliance. The 099178H offers users the opportunity to lower their carbon footprint while enjoying consistent heating. Its user-friendly interface includes real-time monitoring of energy consumption, empowering users to make informed decisions about their heating needs.

In summary, the Desa models 100089-05, 100089-08, 098031J, 100089-04, and 099178H each bring unique features and technologies designed to enhance heating efficiency, safety, and environmental sustainability. These innovations not only cater to diverse heating requirements but also prioritize user comfort and convenience.