Remote Control Description

See Figure 3 on page 11

Battery Installation and Removal

The KAV–280p remote control uses one CR2025 lithium battery, which is included with the shipment.

To open the battery compartment on the back of the remote control:

1.Place the remote face down on the table.

2.Use your thumbnail or a small jeweler’s or eyeglass screw- driver to move the small switch toward the center of the remote, while using your index fingernail or screwdriver to pull down gently on the slot to the right of the switch. The battery compartment will slide out.

Note	Do not use a knife or other sharp objects to open the battery compart-
	ment; they will scratch the remote control finish.

Notes

Remote Control Functions

Note

3.Place the battery, positive side up, in the battery tray.

4.Slide battery compartment back into the remote until you hear a click.

The remote control is ready for operation.

Replace battery when remote control function becomes intermittent.

Remove battery if the remote control is not used for a long period of time. Battery leakage can damage the remote control.

The KAV–280p remote control accesses all preamplifier functions. A description of the remote control keys that activate the KAV–280p follows.

When you press a function key on the remote, the blue power LED (2) will flash. (The LED will flash repeatedly if a key is held down.)

POWER	22 Pwr (Power) Key
	Use this key to switch the KAV–280p between the stand-by and
	the operational modes.

12	Krell KAV–280p

KAV280p specifications

Krell Industries has long been synonymous with high-end audio performance, and the KAV-280p is no exception. As a powerful yet elegant preamplifier, the KAV-280p embodies Krell's commitment to delivering stunning sound quality while embracing cutting-edge technology. This article will explore the main features, technologies, and characteristics that make the KAV-280p a standout component in any audio setup.

At the heart of the KAV-280p is its robust design, which showcases Krell's extensive engineering prowess. The preamplifier boasts a fully-balanced differential architecture that allows for minimal signal interference, ensuring an uncolored audio output. This approach is key to achieving the high level of transparency and fidelity that audiophiles demand. With both analog and digital input options, including balanced XLR and unbalanced RCA connections, the KAV-280p can seamlessly integrate into a variety of audio systems.

The KAV-280p also features a sophisticated power supply that provides a clean and stable voltage, essential for optimal performance. This power supply utilizes high-capacity transformers and multiple stages of regulation, ensuring that the preamp delivers power where it's needed most, reducing distortion and enhancing overall sound quality. The result is a preamplifier capable of handling dynamic music passages with ease, rendering bass, mids, and highs in exquisite detail.

Another noteworthy characteristic of the KAV-280p is its intuitive user interface. With a simple and elegant remote control, users can easily navigate through input selections and adjust settings for an enhanced listening experience. The preamp also includes a high-quality headphone output, making it a versatile choice for those who enjoy private listening sessions.

Moreover, Krell's engineering team has designed the KAV-280p with a focus on heat management, ensuring a long lifespan and consistent performance. The use of aluminum for the chassis aids in heat dissipation while adding an aesthetically pleasing touch to any audio rack.

In summary, the Krell KAV-280p is a distinguished preamplifier that encapsulates Krell Industries' dedication to audio excellence. With its advanced engineering, high-quality components, and user-friendly design, the KAV-280p stands as a testament to what high-end audio equipment can achieve, making it an exceptional choice for audiophiles seeking the ultimate listening experience.