Marantz CDR631 manual Using the Recorder, Switching on and OFF, Inserting discs

ENGLISH

USING THE RECORDER

The numbers between parentheses refer to the fold-out.

Switching ON and OFF

1Plug the power cord supplied into the AC IN socket on the CD-Recorder, then into a AC power outlet.

MODEL NO.CDR631

MADE IN JAPAN

AC IN

IN

OUT

q

Inserting discs

1Press / (6) to open the disc tray.

➔ lights up.

2 Press the POWER (1) button on the front of the CD-Re-	2 Insert a CD, CD-R or CD-RW in the appropriate recess in
corder to turn it on or off.	the tray, label side up.

	CD RECORDER CDR631	3 Press / (6) to close the tray.
	IR	➔	lights up, followed by	and the dis-
	Recordable		play will show the type of disc you inserted.
	ReWritable
POWER	STANDBY
	HEADPHONE	LEVEL
	0	10
w		• If a CD-R(W) is finalized it will show CD on the display.
Note:		• If CD-text is available the TITLE/ARTIST will scroll by.

When the power is switched ON, the STANDBY function on the remote control (66) allows the CDR631 to be turned OFF ex- cept for the IR receiever circuit that will wait for the standby signal to turn power back on.

Using the remote control

1Open the battery compartment cover.

2Insert 2 batteries (AA, LR-6 or UM-3; as supplied) as shown.

3Replace the cover.

Notes:

-For recording it is important that the blank disc is completely free from dust particles or scratches. (see Compact Discs Care, page 2).

-If you insert a blank or partly-recorded CD-R/RW or an unfinalized CD-R/RW, the CD-Recorder will calibrate the

disc for optimum recording. During this process the display

will first showand then the number of audio tracks. Calibration can take up to 30 seconds.

Note:

We recommend you use 2 batteries of the same type and condition.

This remote control can switch “STANDBY ON/OFF” but can- not switch “POWER ON/OFF” on the CD-Recorder.

Batteries contain chemical substances, so they should be disposed of properly.

8

CDR631(U)_Eng_P01-11.p65 8 8/4/00, 9:29 AM