Cooper Lighting N175MV instruction manual Putting up your fixture, Wiring your fixture

Page 3

N175MV_325-1511.qxd 11/1/05 2:24 PM Page 3

•Always use same wattage and type of bulb that was included with the fixture. Failure to do so will void the warranty.

Putting up your fixture

Note: This fixture is intended to be conduit connected to a properly installed and properly grounded metal weatherproof junction box (not provided). All conduit connectors, conduit, and junction boxes (not provided) should be cULus Listed suitable for wet location use.

Step 1: Attach the two piece mounting brackets (I) to the extension arm (N) by interlocking the bracket and securing with the 1/4-20 carriage bolt (L) and 1/4-20 hex nut (M) provided. The mounting bracket should be secure leaving approximately one inch of the extension arm protruding out of the bottom of the bracket.

Note: The mounting bracket attaches to the end of the extension arm that has notches cut into it.

Step 2: Place the extension arm assembly onto the desired mounting surface and mark the four hole locations required for mounting. Remove the arm assembly and drill the four marked locations for ease of mounting.

Step 3: Mount the extension arm assembly using the hex head lag screws (H)

provided. Tighten these screws securely before proceeding.

Step 4: Place the arm of the fixture onto the end of the extension arm (O) and route the three wires through the extension arm. Two hex head bolts on the underside of the fixture housing should be backed out enough to slide the extension arm into the housing. Slide access cover (G) between extension arm and arm bracket. Be certain the extension arm is fully seated into the arm of the fixture. Tighten both arm screws to hold the fixture in place.

Note: All three wires should be extending from the

O

bottom of the extension arm at this point.

 

Step 5: Fasten one piece lens assembly (B) to fixture housing (A) using (2) lens assembly screws (E) and (2) washers (F).

Wiring your fixture

WARNING - RISK OF ELECTRIC SHOCK. Disconnect power at fuse or circuit breaker before installing or servicing.

Step 1: Install the first conduit connector (not provided) into the conduit connection cap (M).

Step 2: Feed supply wires from conduit through the connector and make wire connections with wires extending from extension arm.

a. Attach the ground supply wire to the ground wire coming from the fixture. Secure with wire nut (not provided).

Call for customer service and/or missing or damaged parts (800-334-6871)

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Instrucciones Directives What to know How it worksWhat you need not included What’s includedPutting up your fixture Wiring your fixtureInstalling the light sensor Installing the bulbIs the sensor functioning properly? What to do if…Be refused Two Year Limited WarrantyCómo funciona Qué se necesitaQué se incluye Instalación del portalámparas Qué necesita saberInstalación del foco Cableado del portalámparasInstalación del sensor de luminosidad Qué hacer siGarantía Limitada por dos años 11/05 325-1511 Impreso en China

N175MV specifications

Cooper Lighting N175MV is a versatile and efficient lighting solution that exemplifies innovation in modern lighting technology. Designed for both commercial and residential applications, this fixture offers a range of features that make it ideal for various settings, including warehouses, retail spaces, and architectural highlights.

One of the standout features of the N175MV is its energy-efficient design. With a high lumen output relative to its wattage, this lighting solution ensures effective illumination while minimizing energy consumption. This translates not only to lower utility bills but also to a reduced carbon footprint, making it an environmentally friendly choice.

The N175MV utilizes advanced LED technology, which provides numerous advantages over traditional incandescent or fluorescent lighting. LEDs have a longer lifespan, often exceeding 50,000 hours, which means less frequent replacements and reduced maintenance costs. Additionally, the quick start-up time and minimal warm-up period make LEDs suitable for environments where instant lighting is crucial.

A key characteristic of the N175MV is its robust construction. It is built to withstand challenging conditions, featuring a durable housing that is resistant to dust and moisture. This makes it suitable for outdoor installations and areas with high humidity, further broadening its application potential.

The fixture also boasts a sleek, modern design that seamlessly integrates into various settings. It is available in multiple color temperatures, allowing users to choose the perfect ambiance for their space, whether it's a warm glow for a cozy atmosphere or bright daylight for enhanced productivity.

Moreover, the N175MV is compatible with advanced control systems, offering options for dimming and smart lighting integration. This allows users to customize their lighting experience, further enhancing energy savings and user convenience.

In conclusion, the Cooper Lighting N175MV is a sophisticated lighting solution that combines efficiency, durability, and aesthetic appeal. With its advanced technologies and thoughtful design, it stands out as an ideal choice for diverse lighting needs, effectively meeting the demands of modern spaces while promoting sustainability and energy savings. Whether for commercial use or residential enhancement, the N175MV offers reliability and performance that make it a preferred lighting option.
Top Page Image Contents