Coleman 5040B747 Operation, Battery Installation for Heater, Lighting Instructions for Heater

Page 10

Mantles continued.

Attach second mantle. Illustration below shows proper assembly of both mantles.

Light bottom of mantles evenly. Burn until nothing but white ash remains. Once mantle has been burned it’s very fragile. Be careful not to touch it with a finger or match. Install glass panels.

Battery Installation for HEATER

Unscrew igniter button to reveal battery compartment.

Install AA battery with positive (+) outward.

Replace igniter button finger tight.

10

Operation

DANGER

CARBON MONOXIDE HAZARD

For outdoor use only. Never use inside house, or other unventilated or enclosed areas. This heater consumes air (oxygen). Do not use in unventilated or enclosed areas to avoid endangering your life.

DANGER

EXPLOSION - FIRE HAZARD

Never store propane near high heat, open flames, pilot lights, direct sunlight, other ignition sources or where temperatures exceed 120 degrees F (49°C).

Propane is heavier than air and can accumulate in low places. If you smell gas, leave the area immediately.

Never install or remove propane tank while heater is lighted, near flame, pilot lights, other ignition sources or while heater is hot to touch.

This heater is red hot during use and can ignite flammables too close to the burner. Keep flammables at least 3 feet from sides & 2 feet from top. Keep gasoline and other flammable liquids and vapors well away from heater.

The propane tank must always be stored outdoors in a well ventilated space. Never store propane tank in an enclosed area (house, garage, etc.). If heater is to be stored indoors, disconnect the propane tank for outdoor storage.

Do not attempt to operate until you have read & understand all General Safety Information in this manual and all assembly is complete & leak checks have been performed.

Lighting Instructions for HEATER

Turn cylinder valve on.

1.Push in and rotate (counter clockwise) heater control knob to the Pilot position and release.

2.Push in on heater control knob and push Igniter Button to ignite Pilot Light.

Note: Initial lighting after gas cylinder change can take up to two (2) minutes to purge any air that may be in the line.

Image 10
Contents Patio Heater & Light Contents General Safety InformationAssembly StepHex Nut Assembly For models without a table, skip to Step Req’d Brass Reflector Studs Step Mantles Leak CheckHose/Regulator Regulator/Cylinder ConnectionConnection Operation Battery Installation for HeaterLighting Instructions for Heater Lighting Instructions for Light Match Lighting Instructions for HeaterStorage Shut Down ProcedureMaintenance Match Lighting Instructions for LightTroubleshooting ServiceReplacement Parts Patio Heater & Light No. Part NoReplacement Parts Table Parts ListColeman Limited 5-Year Warranty Warranty

5040-761, 5040B747 specifications

The Coleman 5040B747 and the Coleman 5040-761 are two remarkable models in Coleman’s expansive lineup of camping gear, known for their sturdy design and user-friendly features. Designed to enhance outdoor experiences, these products offer a perfect combination of functionality and convenience for campers and adventurers alike.

One of the standout features of the Coleman 5040B747 is its spacious sleeping capacity. Accommodating up to eight campers, this tent is ideal for families or groups, providing ample room for multiple sleeping arrangements. The tent is engineered with a cabin-like design, enabling users to stand up and move around comfortably inside. This makes it easier to organize gear and settle in after a long day outdoors.

In terms of weather resistance, both models utilize Coleman's advanced WeatherTec system, which includes patented welded floors and inverted seams. This construction significantly reduces the risk of water ingress, ensuring a dry and comfortable interior even during inclement weather. Additional features such as large windows and a ground vent provide optimal airflow, facilitating a cooler and more comfortable environment inside the tent.

The Coleman 5040B747 and 5040-761 models also emphasize ease of setup. With color-coded poles and continuous pole sleeves, the assembly is straightforward, allowing for quick setup in under twenty minutes. This is a crucial characteristic for campers who want to spend less time wrestling with gear and more time enjoying outdoor activities.

For added convenience, both tents come with built-in storage pockets and a gear loft, providing easy access to personal items and ensuring that the interior remains uncluttered. The inclusion of a rainfly further enhances weather protection, while also offering a versatile living space for those who prefer a more open view of the stars at night.

In conclusion, the Coleman 5040B747 and 5040-761 tents exemplify robust design, user-friendly features, and a commitment to quality that exists throughout the Coleman brand. Their spacious interiors, weather-resistant technology, and efficient setup process make them excellent choices for anyone looking to enjoy the great outdoors with comfort and ease. Whether you're an experienced camper or a beginner, these tents are designed to meet your needs, ensuring your camping experience is both enjoyable and memorable. With Coleman, adventurers can explore the beauty of nature without compromising on comfort.