Coleman 8fa3 manual Assembly, Step, Tools Required & Other Items not provided

Assembly

Step 1

TOOLS REQUIRED & OTHER ITEMS: (not provided)

• Standard Phillips head screwdriver	• 20# propane cylinder
• 7/16" end wrench	• One (1) AAA battery
• Lightweight hammer

■Remove all components from the package.

■See package label for listing of contents for the model you purchased.

Mosquito		Mosquito
	Adhesive	DeletoTM
DeletoTM		Octenol	Stakes
Inhibitor	Trap	Lure
Refill		Refill
(Linalool)

Step 2

■With a lightweight hammer, tap Axle Bushings into Base. Make sure Bushings are fully seated.

Axle

Bushing

Step 3

■Insert Axle through one Wheel and then insert Axle through Axle Bushings.(Make sure side of tire with recessed area on hub is to the outside.)

■Insert Axle through second wheel & cap both ends with Retainer Nuts.

■To properly seat Retainer Nuts, gently tap with a hammer & support the bottom of Axle.

Step 4

(Actual size)

■Set both feet on base.

Base

4

■ Axle Bushings will receive the Axle for the Wheels.

■ Install front bar in feet.	■ Assemble feet to
	base using hard-
	ware illustrated.