Coleman 2000009327 manual Screenhouse setup Instructions, Raise the Screenhouse, Before you begin

STITCH LINE

SCREENHOUSE setup Instructions

	MODEL 2000009327
Before you begin	Raise the Screenhouse
• Read all instructions before set up.	• Extend each of the telescoping leg poles until they snap
• Select a level site clear of rocks, branches, and other hard or
	2 into place. The screenhouse will raise as the leg poles are
sharp objects, to install your screenhouse.
WARNING: Keep clear of overhead power lines.	extended. (Fig. 4)

•Do not set up your screenhouse under trees because of potential lightning strikes or falling tree limbs in inclement weather.

• Secure with all stakes and guylines provided to prevent property
damage or personal injury.
• For best results in windy conditions, position narrow end of
screenhouse into the wind.
• Do not drop screenhouse.
• Do not bounce screenhouse bag on its end to remove	Lock Button
screenhouse, as these actions may damage the frame.

•THIS RECREATIONAL PRODUCT REQUIRES A MINIMUM OF TWO

PEOPLE TO ASSEMBLE.

•Under no circumstances should this product be used to cover

automobiles, marine products or similar items.							Fig. 4
CAUTION: Avoid pinch points when opening and closing the
screenhouse frame.
					3
Description	Repair Kit		Description	Repair Kit		Stake the Screenhouse
Plastic Clip 16 mm	5010000845	Plastic Corner Joint		5010000853
						• Secure screenhouse by driving stakes through the
Plastic Clip 20 mm	5010000846	Fabric Joint Cover		5010000855
						webbing loops sewn to the screenhouse base.
Fabric Repair Kit	5010000852
						(Fig. 5 and Fig. 6 )
						• Keep the floor taut.

1 Extend the Screenhouse

Frame

•Stand the screenhouse upright with the hub assembly at

the top. (Fig. 1)

• Unfold the arms of the screenhouse downward until they lay flat on the ground. (Fig. 2)

•Extend the arms of the screenhouse away from the center

hub. (Fig. 3)

			Fig. 5
Fig. 1	Fig. 2	Webbing Loop	Stake

Fig. 6

Fig. 3 (continued on other side)