Chicago Electric 66910 Grounding prong from the plug. If, Plug will not fit the outlet, have a

Page 3

3.Table A shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord. To reduce the risk of disconnection of appliance cord from the extension cord during operating:

6.Use only three-wire outdoor extension cords that have three-prong grounding plugs and grounding receptacles that accept the appliance’s plug.

7.This Chipper Shredder should be grounded while in use to reduce the risk of electric shock to the operator. The unit is equipped with a 3-conductor cord and

3-prong grounding plug to fit the proper grounding receptacle. The green or green and yellow conductor in the cord is the grounding wire. Do not connect the green or green and yellow wire to a live terminal.

 

 

 

Your unit has a plug as illustrated above.

 

 

 

The outlet used should look like the

 

 

 

outlet illustrated above. Do not remove

 

 

 

the grounding prong from the plug. If

a. Make a knot as shown in Method of

 

the plug will not fit the outlet, have a

 

proper outlet installed by a qualified

Securing Extension Cord; or

 

electrician.

 

b. Use one of the plug-receptacle retaining

8.

To reduce the risk of electric shock,

straps or connectors described in this

 

this appliance has a polarized plug

manual.

 

 

 

 

(one blade is wider than the other)

 

 

 

4. Ground Fault Circuit Interrupter (GFCI)

 

and will require the use of a polarized

 

extension cord. The power plug will fit

protection should be provided on the

 

 

into a polarized extension cord only one

circuit(s) or outlet(s) to be used for the

 

 

way. If the plug does not fit fully into the

gardening equipment. Receptacles are

 

 

extension cord, reverse the plug. If the

available having built-in GFCI protection

 

 

plug still does not fit, obtain a correct

and may be used for this measure of

 

 

polarized extension cord. A polarized

safety.

 

 

 

 

extension cord will require the use of a

5. Do not abuse the Cord - Do not carry

 

 

polarized wall outlet. This plug will fit into

appliance by cord or pull on it to

 

the polarized wall outlet only one way.

disconnect from receptacle. Keep the

 

If the plug does not fit fully into the wall

cord from heat, oil, and sharp edges.

 

outlet, reverse the plug. If the plug still

 

 

 

does not fit, contact a qualified electrician

SKU 66910

For technical questions, please call 1-800-444-3353.

Page 3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Chipper Shredder For technical questions or replacement parts, please callSave This Manual Power Cord SafetyElectrician Proper outlet installed by a qualifiedGrounding prong from the plug. If Plug will not fit the outlet, have aEquipment Use and Care Personal SafetyGeneral Safety Unpacking SpecificationsAssembly Phase 3b. Attach the Brace 77 to one of the Legs Product Features Operating InstructionsSee Figure D See Figure E See Figures D and ESKU For technical questions, please call To reverse the Blades Maintenance ServicingCall 1-800-444-3353 for replacement blades Blade Reversal/RemovalTroubleshooting Part Description Qty Parts ListAssembly Diagram Limited 90 DAY Warranty

66910 specifications

The Chicago Electric 66910 is a versatile and robust tool that stands out in the realm of woodworking, delivering precision and reliability for both amateur woodworkers and seasoned professionals. This product is particularly favored for its ability to craft intricate designs and shapes, making it a popular choice in the carpentry and crafting communities.

One of the standout features of the Chicago Electric 66910 is its powerful 150-watt motor. This high-performance motor is designed to handle a variety of materials, from softwoods to more durable hardwoods, providing consistent performance regardless of the task at hand. With a speed range of 0 to 3,000 strokes per minute, users have the flexibility to adjust the speed to suit their specific project requirements, allowing for greater control and precision.

The tool comes equipped with a laser guide system, a technology that enhances accuracy and efficiency. This feature enables users to follow their cutting line easily, ensuring clean and precise cuts every time. Whether you are making straight cuts, curves, or intricate patterns, the laser guide aids in achieving the desired results.

Another notable characteristic of the Chicago Electric 66910 is its ergonomic design. The tool is lightweight, which reduces user fatigue during extended cutting sessions. Additionally, the soft-grip handle provides comfort and stability, enhancing overall control while operating. This design consideration is crucial, as it enables users to maintain focus throughout their projects without experiencing discomfort.

Moreover, the Chicago Electric 66910 features a quick-change blade system, allowing users to switch between different blades efficiently. This adaptability is beneficial for various applications, giving users the option to use different types of blades for specific materials or cutting styles.

Safety is also a priority with the Chicago Electric 66910. The integrated safety switch prevents accidental start-ups, ensuring that users can operate the tool confidently.

In conclusion, the Chicago Electric 66910 is a well-rounded, reliable tool designed for precision and efficiency. Its powerful motor, adjustable speed, laser guide, ergonomic design, and safety features make it a top choice for woodworking enthusiasts and professionals alike. Whether crafting detailed work or tackling larger projects, this tool proves to be an invaluable asset in any workshop.
Top Page Image Contents