Safety Instructions

Please read these instructions carefully, which includes important information about the installation, usage and maintenance of this product.

·Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet.

·Always make sure that you are connecting to the proper voltage, and that the line voltage you are connecting to is not higher than that stated on the decal or rear panel of the fixture.

·This product is intended for indoor use only! To prevent risk of fire or shock, do not expose fixture to rain or moisture.

·Make sure there are no flammable materials close to the unit while operating.

·The unit must be installed in a location with adequate ventilation, at least 20in (50cm) from adjacent surfaces. Be sure that no ventilation slots are blocked.

·Always disconnect from power source before servicing or replacing fuse and be sure to replace with same fuse size and rating.

·Secure fixture to fastening device using a safety chain.

·Maximum ambient temperature (Ta) is 104°F (40°C). Do not operate fixture at temperatures higher than this.

·In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center.

·Never connect the device to a dimmer pack.

·Make sure the power cord is never crimped or damaged.

·Never disconnect the power cord by pulling or tugging on the cord.

Caution!	There are no user serviceable parts inside the unit. Do not open the housing or attempt any
	repairs yourself. In the unlikely event your unit may require service, please contact the dealer
	nearest to you.

BOB™ LED User Manual

2/6/2012 2:49 PM

DMX512 specifications

Chauvet DMX512 is a widely used standard in the lighting industry, particularly in theatrical productions, concerts, and events. This protocol facilitates communication between lighting consoles and various lighting fixtures, streamlining the control of lights in a synchronized manner. Understanding its core features, technologies, and characteristics can significantly enhance the capabilities of any lighting designer or technician.

One of the main features of DMX512 is its ability to control multiple devices from a single controller. This is achieved by using a daisy-chaining method where up to 512 channels can be managed over a single network. Each channel can control various parameters of a lighting fixture, such as intensity, color, and movement. The flexibility of DMX512 allows lighting designers to create intricate shows with seamless transitions and effects.

Another crucial aspect of DMX512 is its robust technology that includes differential signaling. This aids in reducing signal interference and ensures that signals can be transmitted over long distances, making it ideal for large venues. The standard operates at a speed of 250 kbaud, providing reliable and fast communication between devices.

Additionally, DMX512 employs a 3-pin or 5-pin XLR connector, commonly found in both commercial and professional lighting systems. This standardization allows for ease of setup and compatibility with various equipment, enhancing the versatility of different lighting rigs.

One of the defining characteristics of DMX512 is its backward compatibility with older lighting technologies, making it an excellent option for venues transitioning from analog to digital controls. Its widespread acceptance means that users can access a plethora of lighting equipment designed to interact with DMX512, ranging from simple par cans to sophisticated moving head fixtures.

Moreover, DMX512 supports a variety of fixture types, including LED lights, fog machines, and intelligent fixtures. This versatility equips lighting designers with a diverse toolbox for creating dynamic visual presentations that can adapt to the needs of their specific projects.

In summary, Chauvet DMX512 is an essential protocol for any lighting professional, offering a combination of extensive control, reliability, and flexibility. Its compatibility with numerous lighting devices, robust signal transmission capabilities, and widespread usage make it a cornerstone of modern lighting design, ensuring that creators can bring their artistic visions to life efficiently and effectively.