Chauvet 6 user manual Setup, AC Power

Page 8

3. SETUP

AC Power

 

This fixture has an auto-switching switch-mode power supply that can accommodate a wide range of

 

input voltages. The only thing necessary to do before powering on the unit is to make sure the line

 

voltage you are applying is within the range of accepted voltages. This fixture will accommodate

 

100~240VAC, 50/60 Hz.

 

This fixture is designed for power linking from one COLORado™ to another COLORado™ fixture.

 

Each fixture ships with power extension cables (proprietary male-to-female IP66 connectors).

Note!

All fixtures must be powered directly off a switched circuit and cannot be run off a rheostat

 

(variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used solely for

 

a 0% to 100% switch

Warning!

All fixtures must be connected to circuits with a suitable Earth Ground.

 

Depending on the application, the lighting fixture may require a different connector (terminator).

 

Please refer to the below factory-installed IP66 terminator wire color code if installing a wire

 

connector (terminator).

 

Please be aware: this fixture is warranted as IP66 outdoor rating. Removing the connector(s)

 

on this fixture or any other type of tampering with the case or cable(s) may void the IP66

 

outdoor rating. However, this will not void the standard 2-year warranty that all Chauvet DMX

 

fixtures carry, provided the operating voltages are within the proper range.

WIRE

CONNECTION

 

 

 

 

Brown

AC Live

 

Blue

AC Neutral

 

Green/Yellow

AC Ground

 

CONNECTION

PIN

 

 

 

 

AC LIVE

1

 

AC NEUTRAL

2

 

GROUND(EARTH)

3

 

MALE/POWER INPUT

FEMALE/POWER

OUTPUT/LINKING

COLORado™ 6 User Manual

8

7/1/2009 4:46 PM

Image 8
Contents Snapshot Table of Contents What is included Unpacking InstructionsSafety Instructions LED Expected LifespanOptions FeaturesAdditional Features DMX Channel Summary ARCProduct Overview Setup AC PowerRigging MountingOrientation Stacking Lens Assembly Installation/Replacement Fixture LinkingCable Connectors Pin to 5-Pin Conversion ChartData Cabling DMX Data CableChauvet Certified DMX Data Cables Setting up a DMX Serial Data LinkMaster/Slave Fixture Linking COLORado Control Quick Setup Control OptionsAdas Overview DMX control without ID addressMenu  Settings  ID address  01 ~ Menu  Settings  Adas fader no DMX-512 addressing with ID address Adas with ID addressSetting the DMX address Control Panel FunctionsManual Power ON/OFF Menu MapDMX512 Channel Values Module Selection DMX Mode ModuleChannel 8 ID address selection DimmerColor Macros Effect Macro No Function Block 1 Red Block 1 GreenBlock 1 Blue Block 2 RedImportant Notes about Stage 1+STAGE 2 DMX Mode RED, Green and Blue SelectionImportant Notes about Stage 1+ Stage 2 DMX Mode Contact UsAppendix DMX PrimerGeneral Maintenance Paper inside the box Returns ProcedureClaims Photometric COLORado 6 Service Maintenance Guide Symptoms Possible SolutionsExploded View LED PCB Alignment/Layout Diagram Technical Specifications Power

6 specifications

The Chauvet 6 is a cutting-edge lighting fixture designed to elevate the experience for events ranging from concerts and theaters to corporate presentations and parties. Aimed at both professionals and enthusiasts, the Chauvet 6 incorporates advanced technologies and innovative features that ensure stunning visuals and reliable performance.

One of the standout characteristics of the Chauvet 6 is its incredible brightness, powered by high-quality LEDs that provide vibrant colors and exceptional clarity. The fixture typically boasts multiple LED sources that can produce a wide spectrum of hues, allowing users to create dynamic lighting effects that energize any space. With its impressive lumen output, the Chauvet 6 can easily illuminate large venues or outdoor events, making it a versatile choice for various applications.

In terms of control options, the Chauvet 6 offers flexibility and ease of use. It supports DMX protocols, providing users with the ability to synchronize multiple fixtures for cohesive light shows. Additionally, many models come equipped with built-in programs that allow for stand-alone operation, eliminating the need for complex setup at smaller events. The intuitive interface and user-friendly controls enable both seasoned lighting designers and novices to craft elaborate lighting setups quickly.

Another notable feature of the Chauvet 6 is its durability and reliability. Designed with robust materials, the fixture can withstand the rigors of regular transport and usage in demanding environments. Many units feature weather-resistant casings, making them suitable for outdoor events, where they can endure changing conditions without compromising performance.

The Chauvet 6 incorporates advanced thermal management technology, which ensures that the LEDs remain at optimal operating temperatures. This not only enhances the lifespan of the fixture but also maintains color accuracy and intensity. Furthermore, the energy-efficient design minimizes power consumption, aligning with today’s eco-conscious standards.

With its mix of innovation, versatility, and performance, the Chauvet 6 stands out as a premier choice for lighting designers. Whether enhancing a stage production or adding flair to a wedding, this lighting fixture guarantees an unforgettable visual experience for audiences and participants alike. As the demand for high-quality, dynamic lighting increases, the Chauvet 6 continues to lead the way with its remarkable features and dependable technology, making it a staple in the world of event production.