Casablanca Fan Company c12d4301 Getting Started, Ceiling Hardware, Canopy Gasket Preparation

Page 5

CottageWet

Getting Started

Installing a New Ceiling Fixture Outlet Box

If you do not have an existing fixture located where you wish to place your Casablanca fan, an approved ceiling fixture outlet box must be installed and wired.

warning!

To reduce the risk of fire, electrical shock, or personal injury, mount to outlet box marked “Acceptable Fan Support of 22.7 kg (50 lbs.) or less” using the mounting hardware provided with the outlet box.

Using Existing Ceiling Fixture Outlet Box

After turning the power OFF at its source (either the circuit breaker or fuse box), lower the old fixture and disconnect the wiring. Check the ceiling fixture outlet box to be sure it is marked “Approved for Ceiling Fan Mounting.” If it is not, a new box must be installed.

NOTE: The weight of this fan is 18 pounds.

Ceiling Hardware

Ceiling Hardware (not to scale)

 

Hanging Plate

Wire Nut (4)

 

Screw Pack A:

 

Canopy Gasket

2 1/4” x 8-32 Roundhead Screw and Washer (2)

Crossbar Mounting Bracket

1” x 8-32 Roundhead Screw and Washer (2)

 

 

Canopy Gasket Preparation

Step 2. Fit the hanging plate into the canopy gasket as shown. Make sure that the four holes of the hanging plate align with the four indentations on the inside of the gasket.

Canopy

Gasket

Mounting

Bracket

Screw HoleHanging

Plate

Crossbar Mounting Bracket Installation

Proceed with installation as follows:

Step 3. Route the wires from the ceiling outlet box through the center hole of the canopy gasket and hanging plate and then the crossbar mounting bracket center hole.

Push the mounting hardware included with the outlet box through the rubber canopy gasket so that the screws align with the threaded holes of the ceiling fan approved outlet box.

Using the screwdriver, tighten the screws firmly by hand only, being careful not to bend the bracket by over- tightening.

CAUTION:

To reduce the risk of personal injury, use only the mounting hardware provided with the approved outlet box to install the crossbar mounting bracket.

Ceiling Fan

Approved

Outlet Box

Ceiling Wir-

ing

Canopy

Gasket &

Hanging

Plate

Crossbar

Ridge

Mounting

Side

Bracket

Down

Flat Washer

 

Green

Outlet Box

Mounting

Ground Wire

Hardware

5

Image 5
Contents Read and Save These Instructions Contents Safe Use Never install a fan over a pool or spaIntroduction BeforeYou Start Installing your fan on a sloped ceiling Sloped Ceiling InstallationsGeneral Guidelines Manual. It provides you with a simple go or no-go forFan installation Fan Preparation Proceed with installation as follows Crossbar Mounting Bracket InstallationGetting Started Ceiling HardwareHanging the Fan Canopy InstallationCanopy Electrical Connections Canopy Hatch InstallationAttach Blade Holders Remove Dummy Switch Housing and Shipping BlocksBlade Badge Installation Switch Housing Installation Blade Badge and Blade Holder InstallationTwo alignment holes of the switch housing. Note Install the Switch Housing CapSpeed Operation Speed Optional Light Fixture InstallationTroubleshooting tips Dimensions Product SpecificationsCare Recommendations Blade Span

c12d4301 specifications

Casablanca Fan Company is renowned for its commitment to quality, style, and innovation in the ceiling fan market. Their model C12D4301 is a testament to this dedication, offering a perfect blend of advanced technology, elegant design, and outstanding performance.

One of the prominent features of the C12D4301 is its energy efficiency. The fan is equipped with a powerful yet energy-efficient motor that provides ample airflow while minimizing electricity consumption. This makes it an ideal choice for environmentally conscious consumers looking to cut down on their energy bills without sacrificing comfort.

In terms of design, the C12D4301 showcases a sleek, modern aesthetic that fits seamlessly into a wide variety of decors. The fan’s finish options range from classic to contemporary styles, allowing homeowners to choose a look that complements their interior design. Additionally, the fan’s blades are crafted from high-quality materials that are not only durable but also expertly balanced to reduce noise during operation.

The C12D4301 is also equipped with advanced technology that enhances its functionality. A notable feature is its integrated LED lighting, providing both energy-efficient illumination and the ability to create ambient lighting in a room. The dimmable LED option allows users to control brightness levels to match their mood or activity.

Moreover, the C12D4301 supports a remote control system, allowing users to conveniently adjust speed settings and light brightness from the comfort of their seating area. This user-friendly feature adds to the overall convenience and accessibility of the fan. Additionally, the fan is compatible with smart home systems, giving homeowners the ability to control it via voice commands or mobile apps.

Another key characteristic of the C12D4301 is its versatility. It is suitable for indoor areas, including living rooms, bedrooms, or home offices, and can be installed in various ceiling heights thanks to its optional downrods. This adaptability makes it a suitable addition to almost any home.

In summary, the Casablanca Fan Company C12D4301 stands out with its energy efficiency, elegant design, integrated LED lighting, remote control capability, and versatile installation options. These features make it an attractive choice for those looking to enhance their living spaces with a stylish and functional ceiling fan.