Cal Flame manual Installing Your Spa Wrap Fireplace, LP Gas Requirements

Page 9

Installing Your Spa Wrap Fireplace

Safe and satisfactory operation of your new fireplace spa wrap depends upon its proper installation. Installation, adjustments and service must be performed by L.M.S. qualified installers and service technicians to ensure proper operation and prevent accidents.

LP Gas Requirements

Check the rating plate to make sure the gas supply you are hooking up to is the gas type the fireplace is manufactured for.

IMPORTANT WARNING: All Cal Flame s and fireplaces are manufactured with the highest regard to safety. For this reason, Cal Flame s and fireplaces are either manufactured to operate on liquid propane (LP) or natural gas (NG) and cannot be converted. To verify the fireplace’s operating fuel, remove the bottom drip pan and check serial number label on the left. Either LP or NG will be marked on the operating tab, indicating the proper operating fuel. Attempting to convert a Cal Flame fireplace from one fuel to another may result in serious injury and void the warranty coverage.

If you do not have an updated filler valve on your existing propane tank, you will need to purchase one at your local hardware store, as you will not be allowed to refill the tank at any filling station.

LP Gas Hook Up: An enclosure for an LP gas cylinder shall be vented by openings at the level of the cylinder valve and at floor level. The effectiveness of the opening(s) for purposes of ventilation shall be determined with the LP-gas supply cylinder in place. This shall be accomplished in one of the following manners:

•One side of the enclosure shall be completely open.

•Enclosures that have four sides, complete with a top and bottom:

•At least two ventilation openings at cylinder valve level shall be provided in the sidewall, equally sized, spaced at 180˚ (3.14 rad), and unobstructed. Each opening shall have a total free area of not less than fii” square inch per pound (7.1 cm≈/kg) of stored fuel capacity, and not less than a total free area of 10 square inches (64.5 cm≈).

•Ventilation opening(s) shall be provided at floor level and shall have a total free area of not less than fii square inch per pound (7.1 cm≈/kg) of stored fuel capacity and not less than a total free area of 10 square inches (64.5cm≈). If ventilation openings at floor level are in a sidewall, there shall be at least two openings. The bottom of the openings shall be at floor level and the upper edge no more than 5 inches (127 mm) above the floor. The openings shall be equally sized, spaced at 180˚ (3.14 rad) and unobstructed.

•Every opening shall have minimum dimensions so as to permit the entrance of a 1/8 inch (3.2 mm) diameter rod.

For plumbed-in LP installation, use a convertible regulator and set it for LP gas.

LP Gas Supply Pressure: Maximum line pressure for plumbed-in propane is 14” W.C (3.5 kPa). Minimum line pressure for propane is 11” W.C.

LP Gas Pressure Regulator: The unit must be used with the gas pressure regulator. The regulator will control and maintain a uniform gas pressure in the manifold. The burner orifices have been sized for the gas pressure delivered by the regulator.

LPG Cylinder Specification: Any LP gas supply cylinder used with this fireplace must be approximately 12 inches in diameter and 18 inches high. The maximum fuel capacity is 20 lbs. of propane, or 5 gallons. Full cylinder weight should be approximately 38 lbs. (43.7 lbs. nominal water capacity.) Always use the cylinder dust cap on the cylinder valve outlet during transport and when the cylinder is not connected to the fireplace.

Transporting the LP Gas Supply Cylinder: Only one cylinder should be transported at a time. Transport cylinder in an upright and secure manner with control valve turned off and the dust cap in place.

2009 Spa Wraps

www.calspas.com

LTR20091032, Rev. A

7 InstallingYour

Spa Wrap Fireplace

Page 8 Page 10
Image 9
Page 8 Page 10
Contents LTR20091032, Rev. a 12/16/08 Read This First Delivery and Set-Up Planning the Best Location for Your Spa WrapPreparing a Good Foundation Spa Wrap Assembly AssemblyTools and Materials Spa Wrap Assembly AssemblyWrap Spa Seam and Joint Finishing Let the grout and stucco dry for at least three hours LP Gas Requirements Installing Your Spa Wrap FireplaceWhat To Do If You Smell Gas Natural Gas RequirementsTo Turn Off the Appliance Testing for Leaks Lighting Your Gas FireplaceGeneral Safety Precautions Safety InformationPrecautions Regarding Children Other Common Sense PrecautionsSpa Wrap Fireplace Maintenance and Care CleaningMaintaining Your Fireplace Description Replacement PartsWarranty Limitations Warranty InformationWarranty Customer Service

Spa Wrap specifications

Cal Flame Spa Wrap is a revolutionary product designed for spa enthusiasts seeking to enhance their outdoor relaxation experience. This innovative spa cover offers more than just protection; it brings together advanced technology and thoughtful design to maximize the usability and longevity of your spa.

One of the standout features of Cal Flame Spa Wrap is its durable construction. The wrap is made from high-quality, weather-resistant materials that protect against harsh environmental elements such as UV rays, rain, and snow. This durability ensures that your spa remains in pristine condition, maintaining its aesthetic appeal and functionality over the years.

The insulation technology used in the Cal Flame Spa Wrap is another impressive characteristic. With its high R-value, the wrap effectively retains heat, reducing energy costs and allowing for a more enjoyable experience during cooler weather. Homeowners can enjoy a warm soak without worrying about skyrocketing energy bills, making it an economical choice for spa owners.

Ease of use is a hallmark of the Cal Flame Spa Wrap. Designed for effortless application, the wrap can be secured quickly and easily, ensuring a snug fit that won’t come loose in windy conditions. This user-friendly design allows spa owners to protect their investment without additional hassle.

Moreover, the Cal Flame Spa Wrap is also designed with aesthetics in mind. Available in a variety of colors and styles, it can complement any outdoor decor, adding a touch of elegance to your spa area. This allows homeowners to maintain their chosen theme while providing essential protection to their spa.

Another noteworthy attribute is the wrap's resistance to mold and mildew. With spa environments often being humid, this feature significantly enhances the hygienic aspects of spa maintenance. The Cal Flame Spa Wrap ensures that your spa remains clean and safe for relaxation, ultimately prolonging the life of the cover and the spa itself.

In conclusion, the Cal Flame Spa Wrap is an exceptional investment for anyone looking to protect and enhance their outdoor spa experience. With its durable construction, advanced insulation technology, user-friendly design, aesthetic appeal, and resistance to mold, it ensures that your spa is always ready for you to unwind and enjoy. Investing in a Cal Flame Spa Wrap means choosing quality, innovation, and comfort, allowing you to relax fully in your personal oasis.
Top Page Image Contents