Bush Hog manual Dealer Preparation Check List ATH 900 Finishing Mowers

Page 5

DEALER PREPARATION CHECK LIST

ATH 900 FINISHING MOWERS

BEFORE DELIVERING MACHINE — The following check list should be completed. Use the Operator’s Manual as a guide.

o1. Assembly completed.

o2. Gearboxes filled with oil.

o3. All fittings lubricated.

o4. All shields in place and in good condition.

o5. All fasteners torqued to specifications given in Torque Chart r 6. All decals in place and readable. (See decal page.)

o7. Overall condition good (i.e. paint, welds)

o8. Operators manual has been delivered to owner and he has been instructed on the safe and proper use of the cutter.

o9. Warranty information has been filed online with Bush Hog.

Dealer’s

Signature

THIS CHECKLIST TO REMAIN IN OWNER’S MANUAL

It is the responsibility of the dealer to complete the procedures listed

above before delivery of this implement to the customer.

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Bush HOG Congratulations ATH 900Operator’sFINISHINGManualMOWER Table of ContentsDisclaimer of Implied Warranties & Consequential Damages This Limited Warranty Shall not ApplyDealer Preparation Check List ATH 900 Finishing Mowers Important Safety Precautions Employee Tractor Operating Instructions EMPLOYERS, Employees and OperationsDescription Section Introduction and DescriptionIntroduction Attaching to Tractor Section Preparation for USEPage Operation Cutting Height AdjustmentSection Operating Instructions Maintenance Check List Section MaintenanceBelt Replacement Belt AdjustmentBlade Replacement Wear Heavy Work Gloves to PRO- Tect Hands from Sharp EdgesProblem Probable Cause Remedy TroubleshootingSection Dealer AssemblyBase Unit Assembly Page Safety Decals SAE Grade Dashes Torque SpecificationsPage Griffin Ave. Selma, AL
Top Page Image Contents