Bush Hog EFM 480/600 manual Dealer Preparation Check List

Page 5

DEALER PREPARATION CHECK LIST

BEFORE DELIVERING MACHINE — The following check list should be completed. Use the Operator’s Manual as a guide.

r1. Assembled completed.

r2. Gearboxes filled with oil.

r3. All fittings lubricated.

r4. All shields in place and in good condition.

r5. All fasteners torqued to specifications given in Torque Chart

r6. All decals in place and readable. (See decal page.)

r7. Overall condition good (i.e. paint, welds)

r8. Operators manual has been delivered to owner and he has been instructed on the safe and proper use of the cutter.

r9. Warranty information has been filed online with Bush Hog.

Dealer’s

Signature

Purchaser’s

Signature

THIS CHECKLIST TO REMAIN IN OWNER’S MANUAL

It is the responsibility of the dealer to complete the procedures listed

above before delivery of this implement to the customer.

Image 5

Contents Bush HOG Congratulations EFM 480/600 Table of ContentsDisclaimer of Implied Warranties & Consequential Damages This Limited Warranty Shall not ApplyDealer Preparation Check List Your Safety is Involved Safety Alert SymbolImportant Safety Precautions Rops EMPLOYERS, Employees and OperationsEmployee Tractor Operating Instructions Description Section Introduction and DescriptionIntroduction Attaching to Tractor Section Preparation for USEPage III Operating Instructions General SafetyCutting Height Adjustment Maintenance Check List Section MaintenanceCutter can Fall from Hydraulic System FAILURE. toBelt Replacement Belt AdjustmentBelt Diagrams FrontTroubleshooting Blade ReplacementProblem Probable Cause Remedy Work Gloves to PRO Tect Hands from Sharp EdgesSection Dealer AssemblyBase Unit Assembly Mower Deck 1/2 x 6-1/2 Capscrew 50042282 50012616 78608 Safety DecalsSAE Grade Dashes Torque Specifications