Bush Hog® TOUGH
Tri-Deck Flex Finishing
Mowers
Bush Hog® TOUGH Features |
| Model 1500 | |||||
|
| ||||||
TOUGH Fabricated 7 Gauge Decks |
|
| |||||
TOUGH Commercial Grade Spindles |
|
| |||||
TOUGH 5 Year Gearbox Limited Warranty |
|
| |||||
TOUGH Kevlar Reinforced Belts |
| Model 1100 | |||||
TOUGH 4x4 Inch Boxed Wing Section Lift Arms | |||||||
| |||||||
TOUGH Powder Coat Paint |
|
| |||||
|
| ||||||
| Models |
| |||||
| Cutting Width | 11 ft | 15 ft | 17 ft | |||
|
|
|
|
| |||
| Cutting Height | 3/4 to 41/4 inches | 11/2 to 41/2 inches | 11/2 to 41/2 inches | |||
|
|
|
|
| |||
| Transport Width | 6 ft 6 inches | 8 ft | 8 ft | |||
|
|
|
|
| |||
| Transport Height | 6 ft 3 inches | 8 ft | 9 ft | |||
|
|
|
|
| |||
| Transport Length | 12 ft | 14 ft | 14 ft | |||
|
|
|
|
| |||
| Minimum Tractor HP* | 30 PTO | 40 PTO | 40 PTO | |||
|
|
|
|
| |||
| Type Hitch |
| Pull Type, Clevis Hitch, |
| |||
|
|
|
|
| |||
| Gearbox |
| 45 HP center wings/80 HP transfer box for all 3 models |
| |||
|
|
|
|
| |||
| Tractor PTO Speed | 540 RPM | 540 RPM | 540 RPM | |||
|
|
|
|
| |||
| Driveline Size |
| Category 4 80° CV (Main) - Category 3 (Decks) |
| |||
|
|
|
|
| |||
| Wing Section Lift Arms | 4 x 4 inch Boxed Section | 4 x 4 inch Boxed Section | 4 x 4 inch Boxed Section | |||
|
|
|
|
| |||
| Wing Flex | 30° Up & 10° Down | 30° Up & 10° Down | 30° Up & 10° Down | |||
|
|
| |||||
| Wing Deck Flex | 10° Side to Side, 10° Front to Rear - Independent of the Wing Frame | |||||
|
|
|
|
| |||
| Tire Size | 23 x 9.5 (2) | 23 x 8.5 (2) | 23 x 8.5 (2) | |||
|
|
|
|
| |||
| Deck Widths | (3) 4 ft | (1) 6 ft and (2) 5 ft | (3) 6 ft | |||
|
|
|
|
| |||
| Deck Plate | 7 gauge | 7 gauge | 7 gauge | |||
|
|
|
|
| |||
| Blade Tip Speed | 18,468 FPM | 18,271 FPM (18,231 Wings) | 18,271 FPM | |||
|
|
|
|
| |||
| Gauge Wheels | 10 x 4 inches | 13 x 5 inches | 13 x 5 inches | |||
|
|
|
|
| |||
| Belt | (1) per Deck “B” size Kevlar | (1) per Deck “B” size Kevlar | (1) per Deck “B” size Kevlar | |||
|
|
|
|
| |||
| Belt Adjustment | Spring Loaded Idler | Spring Loaded Idler | Spring Loaded Idler | |||
|
|
|
|
| |||
| Deck Overlap | 6 inches | 6 inches | 6 inches | |||
|
|
|
|
| |||
| Blade Overlap | 11/2 inches | 11/2 inches | 11/2 inches | |||
|
|
|
|
| |||
| Front Roller Size (Standard) | 3 x 5 inches | 3 x 5 inches | 3 x 5 inches | |||
|
|
|
|
| |||
| Approximate Weight | 2450 lbs | 2752 lbs | 2855 lbs | |||
|
|
| |||||
| Options | Underside roller kit for each deck, double acting hydraulic cylinder conversion kit | |||||
|
|
|
| ||||
| Warranty |
| 1 year limited warranty with a 5 year gearbox limited warranty | ||||
|
|
|
| • Rear discharge • High blade tip speeds |
| ||
| FEATURES |
|
|
| |||
| *Minimum horsepower will be subject to change due to mowing conditions |
| |||||
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE |
| Page 9 | |||||