Brinkmann Solar Powered L.E.D. Garden Accent Light owner manual Assembly Instructions, Parts List

Page 3

ASSEMBLY INSTRUCTIONS

Inspect contents of the box to ensure all parts are included and undamaged.

1

4

6

2

5

3

A flathead screwdriver is required for mounting the wall bracket.

PARTS LIST:

1Legacy II Light Head Fixture

2Ground Stake

3Connector w/Point

4Connector

5Deck/Wall/Fence Mounting Bracket

6Mounting Screws (2)

Select a location with full, direct sunlight. Shady locations will not allow the battery to charge fully and will reduce the hours of nighttime light.

NOTE: The rechargeable Ni-Cd battery must be allowed to fully charge to operate properly. Partially charging the battery on a consistent basis will drastically reduce the life of the battery.

The selected location should not be near a nighttime light source such as a porch light or street light, as these might keep the solar lights from automatically turning on. The solar lights should not be placed closer than 5 feet from one another. This could cause the solar lights to flicker from the adjacent light source.

2

Image 3
Contents Endura HOW Your Legacy SOLAR-POWERED L.E.D. Lights Work Parts List Assembly InstructionsOperating Instructions Deck/Wall/Fence Mounting Cleaning Changing BatteryStore at room temperature in a dry location Storage TipsWintertime Tips 822-0417-0 822-0417-2822-0417-4