Brinkmann 800-2200-0 owner manual Operating Instructions, Parts List, To Operate, To Charge

INSTR-800-2200-0_Dual Xenon.qxd 6/24/03 3:23 PM Page 3

OPERATING INSTRUCTIONS

READ AND FOLLOW ALL SAFETY WARNINGS AND INSTRUCTIONS IN THE OWNER’S MANUAL

BEFORE OPERATING SPOTLIGHT.

Inspect contents of the box to ensure all parts are included and undamaged.

1

2

3

Step 1: Depress trigger switch in handle to turn spotlight ON.

Step 2: Release trigger switch to turn spotlight OFF.

Continuous Beam Using Lock Button:

Step 1: For a continuous beam, depress trigger switch and slide the lock button to the LOCKED position.

Step 2: To unlock and turn spotlight OFF, slide the lock button to the UNLOCKED position.

NOTE: To lock the Dual Xenon in the OFF position, release trigger switch, then slide the lock button to the LOCKED position.

WARNING: Always turn spotlight off when not in use.

Switching Between Single and Dual Beams:

Step 1: For single beam, slide switch on back of light to one dot, as illustrated.

Step 2: For dual beam, slide switch on back of light to two dots, as illustrated.

NOTE: The Dual Xenon will burn for approximately 40 minutes if using both beams, or approximately 85 minutes if using only one beam.

Step 1: Make sure trigger switch is not locked in the ON position.

Step 2: Plug the AC charger or DC charger/adapter into the socket located on the base of the spotlight handle as illustrated.

Step 3: For DC Charger/Adapter:

Plug the other end of the DC charger/adapter into a cigarette lighter receptacle.

For AC Charger:

Plug the other end of the AC charger into a wall outlet.

Parts List

1Dual Xenon spotlight

2120-volt AC charger

312-volt DC charger/adapter lighter plug Owner’s Manual

To Operate

Beam

TriggerSwitch

Switch

Lock

Button

Unlocked	Single
Locked	Beam
	Dual
	Beam

To Charge

LED Indicator

2