Briggs & Stratton 351700, 380700, 381700 warranty Safety

Page 4

SAFETY

WARNING

Gasoline and its vapors are extremely flammable and explosive.

Fire or explosion can cause severe burns or death.

WHEN ADDING FUEL

•Turn engine OFF and let engine cool at least 2 minutes before removing gas cap.

•Fill fuel tank outdoors or in well-ventilated area.

•Do not overfill fuel tank. Fill tank to approximately 1-1/2 inches below top of neck to allow for fuel expansion.

•Keep gasoline away from sparks, open flames, pilot lights, heat, and other ignition sources.

•Check fuel lines, tank, cap, and fittings frequently for cracks or leaks. Replace if necessary.

WHEN STARTING ENGINE

•Make sure spark plug, muffler, fuel cap and air cleaner are in place.

•Do not crank engine with spark plug removed.

•If fuel spills, wait until it evaporates before starting engine.

•If engine floods, set choke to OPEN/RUN position, place throttle in FAST and crank until engine starts.

WHEN OPERATING EQUIPMENT

•Do not tip engine or equipment at angle which causes gasoline to spill.

•Do not choke carburetor to stop engine.

WHEN TRANSPORTING EQUIPMENT

•Transport with fuel tank EMPTY or with fuel shut-off valve OFF.

WHEN STORING GASOLINE OR EQUIPMENT WITH FUEL IN TANK

•Store away from furnaces, stoves, water heaters or other appliances that have pilot light or other ignition source because they can ignite gasoline vapors.

WARNING

Unintentional sparking can result in fire or electric shock.

Unintentional start-up can result in entanglement, traumatic amputation, or laceration.

BEFORE PERFORMING ADJUSTMENTS OR REPAIRS

•Disconnect spark plug wire and keep it away from spark plug.

•Disconnect battery at negative terminal (only engines with electric start).

WHEN TESTING FOR SPARK

•Use approved spark plug tester.

•Do not check for spark with spark plug removed.

WARNING

Starting engine creates sparking.

Sparking can ignite nearby flammable gases.

Explosion and fire could result.

•If there is natural or LP gas leakage in area, do not start engine.

•Do not use pressurized starting fluids because vapors are flammable.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Operating & Maintenance Instructions Table of ContentsPower in Power EQUIPMENT Hazard Symbols and Meanings Before Operating EngineSafety Broken bones, fractures, bruises or sprains could result Engine Model Engine PartsModel Series OIL OIL CapacityType of OIL to USE Checking and Adding OILOIL Pressure Switch FuelStarting Type of Fuel to USEStarting and Stopping Rewind Manual StarterTo Start Engine To Stop EngineElectric KEY Starter if equipped Maintenance MaintenanceEmission Control Changing OILAIR Cleaner Cleaning PRE-CLEANERS and CartridgesRemoving and Installing AIR Cleaner OIL PressureEngine and Engine Parts MufflerAIR Cooling System Fuel SystemAdjustments Control AdjustmentsCleaning Debris To Adjust Remote Choke ControlTo Adjust Remote Throttle Control To Adjust CarburetorGoverned idle spring Payment MethodService & Storage ServicePartial List of Genuine Briggs & Stratton Parts Part Briggs & StrattonBriggs & Stratton Emission Control Defects Warranty Coverage Improper maintenance Normal wearBriggs & Stratton Engine Owner Warranty Policy

380700, 381700, 351700, 380700, 381700 specifications

Briggs & Stratton has been a leading name in small engine manufacturing, known for their durability and performance across various applications. Among their lineup, models like the 381700, 380700, and 351700 stand out for their innovative features and reliable technology. These engines are widely utilized in outdoor power equipment, ranging from lawn mowers to generators, making them a versatile choice for both homeowners and professionals.

The Briggs & Stratton 381700 engine is designed with an overhead valve (OHV) configuration, which enhances fuel efficiency and increases power output. This model features a single-cylinder design that offers a compact footprint while delivering robust performance. The engine's Easy Start technology minimizes the pull force necessary to start the engine, making operation smoother and more user-friendly. Additionally, the 381700 incorporates a splash lubrication system that ensures reliable engine operation and protects moving parts from wear, thereby extending engine life.

The 380700 engine boasts similar features, with the addition of digital ignition technology that optimizes spark timing, leading to improved fuel combustion and reduced emissions. The ability to adapt to varying load conditions enhances performance in diverse applications. Another standout characteristic is its large air filter, which increases airflow and helps maintain engine cleanliness, further boosting efficiency.

The 351700 model focuses on compact design and portability, making it an excellent choice for equipment requiring a smaller engine footprint. It employs a durable construction, emphasizing heavy-duty components that can withstand rigorous usage. The engine's maintenance-friendly design, with easily accessible components, facilitates routine checks and repairs, minimizing downtime for users.

All three models are built to last, showcasing Briggs & Stratton's commitment to high-quality manufacturing and customer satisfaction. Their engines are designed for easy maintenance, featuring spin-on oil filters and large oil capacities, ensuring extended intervals between oil changes. The durability of the materials used also contributes to the longevity of these engines, making them a wise investment for any equipment operator.

In conclusion, the Briggs & Stratton 381700, 380700, and 351700 engines are exemplary models that demonstrate the brand's dedication to performance, reliability, and user experience. Whether you need an engine for residential or commercial use, these models provide the power, efficiency, and ease of maintenance that customers have come to expect from a trusted name in small engines. With advanced technologies and robust design, they are well-equipped to handle various demanding tasks in outdoor equipment applications.
Top Page Image Contents