Bowens BW-7620 manual Table of Contents, Specifications

www.bowens.co.uk 11

Table of Contents

Description	Page
Introduction and Safety Notes	3
Control Panel Guide	4 – 5
Flash and Modelling Function Overview	6 – 7
Triggering System	7
Getting Started	8
Warnings and Troubleshooting	9
Specifications	11

2www.bowens.co.uk

Specifications

2

2 (1 per channel)

Manual Selection - Channel A = Symmetric

2 f-stops in one-stop increments

3 f-stops in 1/3-stop increments on each channel

2400w/s Channel A only or split 1200W-s Channel A + 1200W-s Channel B

37 to 2400w/s (6-stops)

640 (feet/100 ISO) with UV-coated tube

Fast: <3 seconds (230V)	<4 seconds	(117V)
Slow: <5 seconds (230V)	<6 seconds	(117V)

5600 K with UV-coated tube

1/300 sec. at 2400W-s 1/1400 sec. at 600W-s

One LED numeric display per channel

±1% at maximum power

230V AC, 50/60Hz / 90 - 130V AC, 50/60Hz

Green Ready Indicator lights up at 100% charge.

Audio Ready Signal and Modelling Intermittent when selected.

15A thermal breakers for charge and modelling

6V

Switchable: On/Off

Switchable: On/Off

650w (max.) x 2

Off, Proportional, 100% or Automatic 100%

in either Continuous or Intermittent flash-indication mode.

QUADX Flash Head (BW7660)

281 x 184 x 336mm (362mm inc. handle)

9.5kg

Due to our policy of constant product improvement, Bowens International reserves the right to change equipment specifications without notice.