Assembly is easy and requires no tools | Bounty Hunter 1100 manual

IN THE FIELD TECHNIQUES

ASSEMBLY

Swing the searchcoil slowly, overlapping each sweep as you move forward. It is important to sweep the coil at a consistent speed over the ground as you search. After identifying a target, your sweep technique can help in identifying both the location and the nature of the target. If you encounter a weak signal, try moving the coil in

short, rapid sweeps over the target zone; such a short rapid sweep may provide a more consistent

target identification.

Most worthwhile

objects will

respond with a repeatable tone. If the signal does not repeat after sweeping the coil directly over the suspected target a few times, it is more than likely trash metal.

Crossing the target zone with multiple intersecting sweeps at multiple angles is another way to verify the repeatability of the signal, and the potential of the buried target. To use this method, walk around the target area in a circle, sweeping the coil across the target repeatedly, every 30 to 40 degrees of the circle, about ten different angles as you walk completely around the target. If a high-tone target completely disappears from detection at a given angle, chances are that you are detecting oxidized ferrous metals, rather than a silver or copper object. If the tone changes a different angles,

Assembly is easy and requires no tools.

● Position the lower stem (the straight tube) with the silver button toward the back. Using the bolt and knurled knob, attach the search coil to the plastic extension protruding from the lower stem.

●Press the button

on the upper end of the lower stem, and slide the lower stem into the upper stem.

Adjust the stem to a length that lets you maintain a

comfortable upright posture, with your arm relaxed at your side, and

the search coil parallel to the ground in front of you.

●Wind the cable securely around the stem.

●Insert the plug into the matching connector on the right underside of the

detector body. Be sure that the key-way and pins line up correctly.

Caution: Do not force the plug in. Excess force will cause damage.

WHAT	…MAY
READS	ACTUALLY
LIKE THIS	BE THIS

To disconnect the cable, pull on the plug.

Do not pull on the cable.

1100 specifications

The Bounty Hunter 1100 is a versatile metal detector renowned for its user-friendly features and advanced detection technologies, making it an excellent choice for enthusiasts and amateur treasure hunters alike. This device is built to locate a variety of metal objects including coins, jewelry, relics, and even larger items buried deep underground.

One of the main features of the Bounty Hunter 1100 is its advanced discrimination capabilities. Users can easily differentiate between valuable targets and unwanted metals such as iron or aluminum. This is particularly beneficial for those searching in densely populated areas or sites where trash metals abound. The detector offers an adjustable discrimination mode, allowing users to customize their experience based on specific requirements and target preferences.

Another notable characteristic is the depth indicator, which provides a visual representation of how deep a detected object is buried. This feature enhances the user’s efficiency by informing them whether it’s worth digging or moving on to a different area. Additionally, the Bounty Hunter 1100 features a sensitivity adjustment option that lets users increase or decrease the detector's responsiveness to metal signals. This adaptability is what sets it apart, particularly for those hunting in varying soil conditions.

The ergonomic design of the Bounty Hunter 1100 is another highlight, featuring an adjustable stem to accommodate users of different heights. The lightweight construction allows for extended use without causing fatigue, making it especially appealing for long treasure hunting excursions. Its intuitive control panel is designed for ease of use, with straightforward buttons and a clear LCD display, making it accessible even for beginners.

Furthermore, the Bounty Hunter 1100 integrates advanced technology, including a target identification system that provides numeric values indicating the type of metal detected. This real-time feedback helps reduce the chances of false alarms and increases the likelihood of finding valuable items. The operational frequency is optimized to enhance performance, ensuring reliable performance across a range of environments.

In summary, the Bounty Hunter 1100 is a comprehensive metal detector that combines sophisticated features with user-friendly design. With its depth indicator, adjustable discrimination, sensitivity adaptability, and ergonomic build, this device is perfect for treasure hunters looking to enhance their detecting experience. Whether searching for lost coins in a park or embarking on a historical artifacts hunt, the Bounty Hunter 1100 proves to be a valuable tool in the world of metal detecting.