Magnavox FW930R manual Timer Setting, View Clock, Clock Setting

CLOCK

MINI HIFI SYSTEM

PROGRAM SHUFFLE		STEREO
REPEAT TIMER REC		BACK
NEWS T.A. AM MW FMLW		FRONT HSD
60Hz 250Hz 500Hz	1KHz	2KHz 4KHz 8KHz

STANDBY							DOLBY B
ON							NR
							RDS
CLOCK/	CD1 • 2 • 3	FM • AM	TAPE 1 • 2			CDR	NEWS!
TIMER
	CD	TUNER	TAPE			AUX
	PROG	STOP•CLEAR	SIDE A•B	▲	PRESET ▲		A. REV
	SEARCH • TUNING		PLAY PAUSE	PREV		NEXT
DUB
(HSD)
REC		SOUND NAVIGATION					VOLUME
	INCREDIBLE		DYNAMIC BASS
		SURROUND	BOOST

DIGITAL

SOUND CONTROL

Notes:

–During clock setting, if no button is pressed within 90 seconds, the system will exit clock setting mode automatically.

–When a power interruption occurs, the clock setting is erased.

Timer Setting

• The system can switch on to CD,

TUNER, or TAPE 2 mode automatically

at a preset time. It can serve as an

alarm to wake you up.

• Before setting the timer, make sure the

clock is set correctly.

TIMER

3Pressʈor ‡to set the hour for the timer to start.

4PressÊ’or ‘to set the minute for the timer to start.

5Press CLOCK/TIMER to store the start time.

ªThe timer is now set.

ªThe TIMER flag remains on the display.

• At the preset time, the timer will be activated.

ªThe selected source will be played.

Notes:

– During timer setting, if no button is

pressed within 90 seconds, the system

will exit timer setting mode

English

View Clock

You can view the clock (if it is set) while the system is in standby mode or any source mode. It will be displayed for about seven seconds.

•Press CLOCK/TIMER briefly (on the system only).

ª“PM 10:38” (the current time) will be displayed.

ª“--:--” will be displayed if the clock is not set.

Clock Setting

The clock is set in 12-hour mode, e.g. “AM 12:00“ or “PM 12:00“. Before setting the clock, you must be in the View Clock mode.

1Press CLOCK/TIMER to select clock mode.

ª“AM 12:00” or the current time starts flashing.

2Set the hour withʈor ‡.

3Set the minute withÊ’or ‘.

4Press CLOCK/TIMER again to store the setting.

ªThe clock starts.

•To exit without storing the setting, press

‚on the system.

•	The timer will always be switched on
	once it is set.
•	The volume of the timer will start to
	increase from the minimum level
	until the volume level before the set
	is switched to standby mode.

1Press and hold CLOCK/TIMER for more than two seconds to select timer mode.

ª“PM 12:00” or the last set timer starts flashing. The TIMER flag flashes.

ªThe last selected source is lit while other available sources are flashing.

2Press CD, TUNER or TAPE to select the desired source.

•Before selecting CD or TAPE, make sure a CD or tape is loaded in the CD tray or tape deck 2.

automatically.

– If the source selected is TUNER, the last

tuned frequency will be switched on.

– If the source selected is CD, playback

will begin with the first track of the last

selected disc. If the CD trays are empty,

the TUNER will be selected instead.

– If the source selected is TAPE, and if the

preset time is reached during high

speed dubbing, the TUNER will be

selected instead.

29