uInjuries caused by touching any rotating/moving parts.
uInjuries caused when changing any parts, blades or accessories.
uInjuries caused by prolonged use of a tool. When using any tool for prolonged periods ensure you take regular breaks.
uImpairment of hearing.
uHealth hazards caused by breathing dust developed when using your tool (example:- working with wood, especially oak, beech and MDF.)
Vibration
The declared vibration emission values stated in the technical data and the declaration of conformity have been measured in accordance with a standard test method provided by EN 60745 and may be used for comparing one tool with another. The declared vibration emission value may also be used in a preliminary assessment of exposure.
Warning! The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways in which the tool is used. The vibration level may increase above the level stated.
When assessing vibration exposure to determine safety measures required by 2002/44/EC to protect persons regularly using power tools in employment, an estimation of vibration exposure should consider, the actual conditions of use and the way the tool is used, including taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time.
Labels on tool
:The following pictograms are shown on the tool:
G
E
R
#This tool is double insulated; therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate.Electrical safety
uIf the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard.
uWhen using the tool outdoors, only use extension cables intended for outdoor use. A suitable rated Black & Decker extension cable of up to 30 m can be used without loss of power.
uElectric safety can be further improved by using a
Features
This tool includes some or all of the following features.
1.Trigger switch
2.Front handle switch
3.Front handle
4.Guard
5.Blade
6.Blade sheath
7.Cable restraint
This hedge trimmer has the following features for your benefit:
uErgonomically formed handles for comfortable cutting.
uMachined blades for improved cutting.
uDual action blades for reduced vibration.
Assembly
Warning! Before assembly, make sure that the tool is switched off and unplugged and that the blade sheath is fitted over the blades.
Fitting the guard (fig. A)
uLocate the guard (4) into the grooves (8).
uSecure the guard using the two screws (9) supplied. Warning! Never use the tool without the guard.
Connecting the tool to the mains (fig. B)
Unless the tool is fitted with a mains cable, you will need to connect an extension cable to the power inlet.
uConnect the female socket of a suitable extension cable to the power inlet of the tool.
uLoop the cable through the cable restraint (7) as shown to prevent the extension cable from becoming detached during use.
uInsert the mains plug into a mains outlet.
Warning! The extension cable must be suitable for outdoor use. When using a cable reel, always unwind the cable completely.
6