Black & Decker BDCDMT120, BDCMTJS Troubleshooting, Cutting Laminates, Maintenance, Accessories

Page 5

CUTTING LAMINATES

• Use a downward cutting blade. Cut thin laminates with the back surface facing up, as splintering is most likely to occur on the side of the workpiece facing the saw shoe.

• For clean cuts, clamp a piece of plywood or hardboard to both sides of the laminate and cut through the resulting sandwich.

TROUBLESHOOTING

Problem

Possible Cause

Possible Solution

• Unit will not start.

• Attachment is not secured.

• Make certain the attachment is fully

 

 

pushed into the Power Unit.

For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK & DECKER help line at 1-800-544-6986.

NOTE: Refer to Power Unit instruction manual for troubleshooting solutions regarding operation of the Power Unit.

MAINTENANCE

Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service personnel, always using identical replacement parts.

ACCESSORIES

WARNING: The use of any accessory not recommended for use with this tool could be hazardous. Recommended accessories for use with your tool are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call: 1-800-544-6986.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This Class B digital apparatus complies with Canadian ICES-003.

SERVICE INFORMATION

All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you. To find your local service location, refer to the yellow page directory under “Tools—Electric” or call: 1-800-544-6986

or visit www.blackanddecker.com

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents VEA EL ESPA-OL EN LA Contraportada BdcmtjsSave this Manual for Future Reference Specific Safety Rules FUNCTIONAL DESCRIPTION SymbolsOperating Instructions Installing and Removing a SAW Blade Figure aSawing Cutting Sheet MetalMaintenance TroubleshootingAccessories Service InformationFor Service & Sales Full TWO-YEAR Home USE WarrantySee ‘Tools-Electric’ Yellow PagesMode D’EMPLOI Consignes DE Sécurité Particulières Plus bas pour connaître le calibre approprié des rallonges SymbolesSciage Installation et dépose d’une lame de scie Figure aFonctionnement Entretien AccessoiresDépannage Page Manual DE Instrucciones Normas específicas de seguridad Símbolos Conserve Estas Instrucciones OperaciónDescripción Funcional AserradoAccesorios Detección DE ProblemasMantenimiento Reemplazo DE LAS Etiquetas DE Advertencia Esta Garantia no Aplica Cuando Product Infomation · Identificación DEL ProductoSolamente Para Propositos DE Mexico
Related manuals
Manual 48 pages 1.65 Kb Manual 20 pages 17.83 Kb

BDCDMT120, BDEDMT, BDCMTJS specifications

The Black & Decker BDCMTJS is a versatile and efficient tool designed for both DIY enthusiasts and professionals alike. This compact jigsaw tool is a part of the Black & Decker 20V MAX system, offering extensive compatibility with other tools in the lineup. This means users can share battery packs between various devices, enhancing convenience and reducing clutter in the workspace.

One of the standout features of the BDCMTJS is its lightweight design, which allows for easier handling and maneuverability during intricate cuts. Weighing in at just a few pounds, this jigsaw is ideal for those who need to work in tight spaces or for extended periods without experiencing fatigue. The ergonomic grip adds to user comfort, ensuring a secure hold during operation.

The BDCMTJS is equipped with a variable speed trigger, providing users with control over cutting speed. This feature is essential for making precise cuts in various materials such as wood, metal, and plastic. The jigsaw offers a stroke length that optimizes cutting efficiency and can handle a range of cutting tasks with ease.

Another key aspect of the BDCMTJS is its tool-free blade change system. This allows users to switch out blades quickly and easily without the need for additional tools, saving valuable time on the job site. The jigsaw accepts both T-shank and U-shank blades, giving users the flexibility to choose the right blade for their specific project requirements.

The BDCMTJS also features a built-in laser guide, which aids in aligning cuts with precision. This technology ensures that users achieve clean, straight cuts every time, enhancing the overall quality of their work. Additionally, the dust blower keeps the cutting line clear, improving visibility and accuracy during cutting operations.

Overall, the Black & Decker BDCMTJS jigsaw is a powerful, reliable, and user-friendly tool that is perfect for a variety of applications. Its combination of advanced features, compatibility with the 20V MAX system, and ease of use make it an excellent choice for anyone looking to tackle woodworking projects or renovations. With the BDCMTJS, users can enjoy the confidence of a high-quality tool that is designed to meet the demands of both professional and hobbyist environments.
Top Page Image Contents