Chapter 5: DDC Information
5. DDC information
DDC information is not sent from the remote unit. Instead, the local unit holds a standard set of DDC details which are suitable for most display screens. If the standard details are not suitable, temporarily connect the local unit directly to the display screen that is to be emulated and power on the screen.
NOTE: The local unit must be powered via its USB connection.
If the DDC information is different than that already held, the yellow indicator will flicker rapidly for 2 to 3 seconds while the new information is stored.
If a problem occurs while attempting to harvest DDC information, the yellow indicator on the local unit will show a number of distinct flashes. Note the number of flashes in case you need to contact technical support, but otherwise retry the procedure.
AVU4001A |
| Page 13 |
|