17 MAINTENANCE continued
17.1IMPELLER REMOVAL continued
19. If chipper blade properly clears anvil surface, proceed to step 20. If not, return to (step 14) and add or subtract shim washers as needed to obtain a correct gap.
20.Reinstall engine and impeller onto housing in reverse order of removal.
21.Before connecting spark plug wire, slowly pull engine starting rope to insure that impeller rotates freely.
22. Reinstall spark plug wire.
fig. 6
fig. 7
17.2
Maintenance Schedule |
| Follow these hourly |
| maintenance intervals. | |
|
| |
|
|
|
Maintenance Operation | Every | Every 5 hrs |
Use | or (Daily) |
Engine (See Engine Manual)
Check for excessive vibration
Clean Debris Bag
Check bag strap tightness
Inspect for loose parts
Inspect for worn or damaged parts
MAINTENANCE HISTORY
Date of | Service Performed | |
Service | ||
| ||
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
|
Part No. 890313 | Page 9 of 12 | Form No. F010396D |