Billy Goat AE401H5T owner manual

Page 5

AE Owner’s Manual

DO NOT run this equipment indoors or in any poorly ventilated area. Refueling outdoors is recommended.

DO NOT refuel this equipment while the engine is running. Allow engine to cool for at least two minutes before refueling.

DO NOT store gasoline near an open flame.

DO NOT remove gas cap while engine is running.

DO NOT start or operate engine if strong odor of gasoline is present.

DO NOT start or operate engine if gasoline is spilled. Move equipment away from spill until gasoline has completely evaporated.

DO NOT smoke while filling the fuel tank.

DO NOT check for spark with spark plug or spark plug wire removed. Use an approved spark tester.

DO NOT operate engine without a muffler. Inspect muffler periodically and replace if necessary. If equipped with muffler deflector, inspect deflector periodically and replace if necessary.

DO NOT operate engine with grass, leaves or other combustible material near the muffler.

DO NOT touch muffler, cylinder, or cooling fins when hot. Contact with hot surfaces may cause severe burns.

DO NOT leave equipment unattended while in operation.

DO NOT park equipment on a steep grade or slope.

DO NOT operate equipment with bystanders in or near the work area.

DO NOT allow children to operate this equipment.

DO NOT operate equipment with guards removed.

DO NOT operate equipment near hot or burning debris or any toxic or explosive materials.

DO NOT operate equipment on slopes greater than specified in Specifications section of this manual.

DO NOT operate barefoot or wearing open sandals. Always wear substantial footwear

DO NOT place hands or feet underneath unit, or near any moving parts.

DO NOT operate the machine while under the influence of alcohol or drugs.

DO NOT aerate near drop-offs, ditches, or embankments. The operator could lose footing or balance

DO NOT start engine without tine height adjust lever in up position and clutch bail engaged.

DO NOT change the engine governor setting or overspeed the engine.

ALWAYS Stop the tine reel when crossing gravel drives, walks, or roads.

ALWAYS Shut the engine off and wait until the tine reel comes to complete stop before performing maintenance. ALWAYS Use equipment only in daylight or good artificial light.

ALWAYS wear safety goggles or safety glasses with side shields

ALWAYS remove spark plug wire when servicing equipment to prevent accidental starting.

ALWAYS check fuel lines and fittings frequently for cracks or leaks. Replace if necessary.

ALWAYS store fuel in approved safety containers.

WARNING: Important

Remove all rocks, wire, string, etc. that can present a hazard during work prior to starting.

DO identify and mark all fixed objects to be avoided during work such as sprinkler heads, water valves, limbs, or clothes line anchors, etc.

Part No 360314

5

Form No F041808A

Image 5
Contents Tine KIT Tine ROW KITAbout this Manual ContentsSerial Plate Data SpecificationsGeneral Safety Instructions and Symbols Page Instruction Labels Intended USEEngine Labels Throttle ControlsPUT OIL in Engine Before Starting Packing ChecklistAssembly Handling & Transporting OperationUnit Storage ParkingTines RAISING/LOWERING Aerating OperationFolding Handle Aerating TipsPeriodic Maintenance MaintenanceTine Reel Removal and Tine ROW Replacement Tine ROW ReplacementAdjusting Chain Tension Individual Tines ReplacementBelt and Chain Tension Adjustment Adjusting Belt Tension Chain Replacement Drive Belt ReplacementLubrication Bearings ChainsWarranty Claim Procedure TroubleshootingMaintenance Record Parts Drawing AE Parts List AE Parts Drawing AE Frame Assembly WA AE401 Form No F041808A