3.TECHNICAL DATA FOR THE SOD CUTTER SC121H
ENGINE : | Gasoline, HONDA GX 160 K1 |
ENGINE CAPACITY : | 5.5 Hp (4.0 kW) |
CUTTING WIDTH : | 12” (30 cm) |
CUTTING HEIGHT : | adjustable up to 35 mm |
SPEED GEARS : | 2 forward gears |
TRANSMISSION : | mechanical |
GEARS : | in oil bath |
START : | recoil |
HANDLEBARS : | |
TYRES : | front tyres GARDEN |
| rear tyres TRACTOR |
DIMENSIONS L x W x H (mm) : | 780 x 420 x 610 mm |
WEIGHT (kg) : | 73 |
ACOUSTIC PRESSURE, measured according to EN 12733: | 86,2 dBA |
ACOUSTIC POWER, measured according to EN 12733: | LWA 97 dBA |
VIBRATION LEVEL TRANSMITTED TO THE HANDLEBAR ( EN 12 733) AW: 1,8 m/s²
Environmental conditions
Unless otherwise stated at the time of ordering it is understood that the machine is to work normally in the environmental conditions covered by the following points. Environmental conditions other than those described may cause mechanical breakage resulting in the creation of dangerous situations for persons.
ALTITUDE
The altitude of the place in which the machine is to be used must not exceed 1500 m above sea level.
TEMPERATURE
Minimum ambient temperature:
Maximum ambient temperature: +50°C
ATMOSPHERIC CONDITIONS
The electrical equipment will function correctly in atmospheric conditions with a relative humidity up to 50% at a temperature of 40°C and at 90% with a temperature up to 20°C (without condensate).
ATMOSPHERE WITH RISK OF EXPLOSION AND/OR FIRE
The standard machine herein described is not designed to work in explosive atmospheres or in those with risk of fire.
370406 | 7 | F103104A |