Best ILB9, ILB11 warranty For Domestic Cooking only, Table of Contents

Page 1

IN-LINE BLOWERS

MODELS ILB9 ! ILB11

Page 1

READ AND SAVE THESE INSTRUCTIONS

! FOR DOMESTIC COOKING ONLY !

WARNING WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

1.Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer at the address or telephone number listed in the warranty.

2.Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service discon- necting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

3.Installation work and electrical wiring must be done by a quali- fied person(s) in accordance with all applicable codes and stan- dards, including fire-rated construction codes and standards.

4.Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent backdrafting. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Con- ditioning Engineers (ASHRAE), and the local code authorities.

5.When cutting or drilling into wall or ceiling, do not damage elec- trical wiring and other hidden utilities.

6.Ducted fans must always be vented to the outdoors.

7.To reduce the risk of fire, use only metal ductwork.

8.If this unit is to be installed over a tub or shower, it must be marked as appropriate for the application and be connected to a GFCI (Ground Fault Interrupter) - protected branch circuit.

9.Never place a switch where it can be reached from a tub or shower.

10.This unit must be grounded.

TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:

1.Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers that may ignite. Heat oils slowly on low or medium settings.

2.Always turn hood ON when cooking at high heat or when flambeing food (i.e. Crepes Suzette, Cherries Jubilee, Pepper- corn Beef Flambe’).

3.Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter.

4.Use proper pan size. Always use cookware appropriate for the size of the surface element.

TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A RANGE TOP GREASE FIRE, OBSERVE THE FOLLOW- ING:*

1.SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal tray, then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT.

2.NEVER PICK UP A FLAMING PAN - You may be burned.

3.DO NOT USE WATER, including wet dishcloths or towels - vio- lent steam explosion will result.

4. Use an extinguisher ONLY if:

A. You know you have a Class ABC extinguisher and you already know how to operate it.

B. The fire is small and contained in the area where it started. C. The fire department is being called.

D. You can fight the fire with your back to an exit.

* Based on “Kitchen Fire Safety Tips” published by NFPA.

CAUTION !

1.For general ventilating use only. Do not use to exhaust hazard- ous or explosive materials and vapors.

2.To avoid motor bearing damage and noisy and/or unbalanced impellers, keep drywall spray, construction dust, etc. off power unit.

3.If ventilator is installed in an unconditioned space (such as an attic): Surround the ventilator with thermal insulation - to minimize possible condensation.

4.Please read specification label on product for further informa- tion and requirements.

TABLE OF CONTENTS

This manual is divided into sections as follows:

!“TYPICAL INSTALLATION”

This section shows a common installation.

-Mounting (New Frame Construction)

-Mounting (Existing Frame Construction)

-Mounting Using Hanger Kit (included)

-Ducting (Horizontal blower discharge)

-Wiring

!“MOUNTING OPTIONS”

!“WIRING PLATE POSITION”

!“DUCTING OPTIONS”

-Blower Discharge Positions

-Ducting (Vertical blower discharge)

!“USE AND CARE”

!“SERVICE PARTS”

!“WARRANTY”

Installer: Leave this manual with the homeowner.

Homeowner: Use and Care information on page 4.

Image 1
Contents For Domestic Cooking only Table of ContentsMounting New Frame Construction Typical InstallationMounting Existing Frame Construction Ducting Horizontal blower dischargeDucting Options Wiring Plate PositionMounting Options Ducting Vertical blower dischargeWarranty Service PartsBlower Assembly USE and Care

ILB9, ILB11 specifications

The Best ILB11 and ILB9 are advanced inline blade products designed for various industrial applications, known for their efficiency, reliability, and versatility. These models are part of a growing trend in industrial equipment where manufacturers prioritize innovation and user-centric features.

The ILB11 model stands out due to its robust construction and superior durability, making it ideal for heavy-duty applications. With a focus on reducing operational downtime, the ILB11 incorporates a streamlined design that simplifies maintenance and minimizes machine wear. Users also benefit from its enhanced energy efficiency, which translates to lower operational costs and a reduced carbon footprint.

One of the main features of the ILB11 is its integrated control system, which allows for precise adjustments in real-time. This system can adapt to various materials and conditions, enhancing overall productivity. The ILB11 is also equipped with advanced sensors that monitor performance metrics, providing vital data for predictive maintenance and ensuring that the equipment remains in optimal working condition.

On the other hand, the ILB9 model offers a more compact design without sacrificing performance. Its lightweight construction makes it easy to handle and relocate, making it a preferred choice for operations with limited space. The ILB9 is particularly designed for high-speed applications, boasting advanced technology that facilitates faster processing without compromising quality.

The ILB9 also features cutting-edge connectivity options, enabling seamless integration with existing production lines. Its compatibility with Industry 4.0 standards allows for remote monitoring and control, empowering operators with real-time insights and enhancing decision-making processes.

Both models showcase advanced blade technology, designed for precision cutting, which reduces material waste and enhances output quality. This is particularly beneficial for industries prioritizing sustainability and cost-effectiveness. The ergonomic designs of both models also ensure operator safety and comfort, reducing the risk of injury during operation.

In summary, the Best ILB11 and ILB9 are exemplary inline blades that cater to diverse industrial needs. With their unique features, advanced technologies, and commitment to efficiency, they represent the forefront of innovation in the manufacturing sector. These models not only improve productivity but also position companies for future growth in an increasingly competitive marketplace.