Billy Goat 510223 owner manual Packing Checklist, Assembly, PUT OIL in Engine Before Starting

Page 8

HW Owner’s Manual

PACKING CHECKLIST

Your Billy Goat HW Mower is shipped from the factory in one carton, completely assembled except for the upper handle.

READ all safety instructions before assembling unit.

TAKE CAUTION when removing the unit from the box the Handle Assembly is attached and folded over

PUT OIL IN ENGINE BEFORE STARTING

PARTS BAG &

LITERATURE ASSY

Warranty card P/N- 400972, Owner’s Manual P/N-510267

Boxing Parts

Checklist

Kawasaki 6HP

Literature Assy

P/N-510256

ASSEMBLY

1.REMOVE unit from carton and allow upper handle (item 7) to lay on ground behind unit.

2.REMOVE hardware items 8, 71, 78, 87, 96, & 97 from temporary storage positions on lower handles (items 10).

3.ATTACH lower handle (item 10) to the main frame using hardware (items 71, 78, & 96) removed from the previous step (see figure above).

4.ATTACH upper handle to lower as shown in page 14, and securely tighten all fasteners.

Note: Be sure the engine starter rope is properly installed in the starter rope guide (item 8) before tightening the corresponding fasteners (see figure above).

5. CONNECT spark plug wire to spark plug.

Part No 510267

8

Form No F070506A

Image 8
Contents Billy Goat High Wheel Mower Contents About this ManualSpecifications Serial Plate DataGeneral Safety Instructions and Symbols Page Intended USE SoundVibration Data Throttle Controls Instruction LabelsEngine Labels PUT OIL in Engine Before Starting Packing ChecklistAssembly Cutting Height Adjustment OperationStarting Stop Position Handling & TransportingStorage PropulsionHillside Mowing Belt Replacement MaintenancePeriodic Maintenance Belt Replacement Drive Belt Self Propelled Drive AdjustmentTroubleshooting Warranty Claim ProcedureParts Drawing HW Parts List Description QTYMaintenance Record