Billy Goat QB1004, QB884H, QB1304H, QB994S, QB654, QB1304HBW, QB554HC specifications Operation

Page 5

16OPERATION

Like all mechanical tools, reasonable care must be used when operating machine.

Inspect machine work area and machine before operat- ing. Make sure that all operators of this equipment are trained in general machine use and safety.

INTENDED USE: This machine is designed for cleaning outdoor surfaces, where the debris can be effectively blown into a consolidated area for convenient pickup and removal.

Do not operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check for damaged or worn impeller, loose impeller bolt, loose impeller key, loose engine or lodged foreign objects. Note: See parts list for proper impeller bolt torque specifications. (See trouble shooting section on page 12).

PUT OIL IN ENGINE BEFORE STARTING

16.1STARTING

ENGINE: See engine manufacturer’s instructions for type and amount of oil and gasoline used.

Engine must be level when checking and filling oil and gasoline.

FUEL VALVE: Move fuel valve to "ON" position (when provided on engine).

STOP SWITCH: Located on the engine. "ON" position.

CHOKE: Operated with choke lever on side of engine .

THROTTLE: Controlled by throttle lever on the handle. Move remote throttle control to fast position. Pull starting rope to start engine.

ENGINE SPEED: Under normal conditions, operate at minimum throttle to accomplish your current cleaning task.

IF YOUR UNIT FAILS TO START:

See Troubleshooting on page 12.

16.2HANDLING & TRANSPORTING:

Using two people to lift machine is recommended. Lift holding the handle and handle brace. Secure in place during transport.

16.3BLOWING OPERATION

Your Billy Goat blower is equipped with a remote exhaust director to allow the operator to direct the air stream up or down as required to assist in moving debris. This feature is extremely useful when debris has piled up to the point that it cannot be blown any farther. The air stream can be directed upward to blow the top of the debris pile over and allow the operator to continue moving more debris farther.

Side Discharge Up Position

This position allows air to be directed upward during use to avoid blowing debris into cars or other structures, or to avoid blowing landscaped areas that would be damaged by the high speed air. This position also allows operator to maneuver the machine relative to the work area without disturbing the debris.

Side Discharge Straight Position

This position directs the air parallel to the ground for the majority of blowing operations. The hand control allows the operator to lock the air stream in this straight out position. To LOCK the air in position simply pull back on the lever and pull the lever sideways to the right until the lock engages. See instruction label on the control.

Slide over to right to lock in middle position

Part No. 430316

Page 5 of 12

Form No. F012203A

Image 5
Contents Caster KIT Powerful Quiet Blow BlowerHold Down KIT To improve maneuverability on hard paved surfacesSound Vibration Interest of SafetyAssembly General SafetyPacking Checklist Boxing ChecklistInstruction Labels Engine Labels Parts BAG & Literature Assy ControlsThrottle Control / Gust Control Honda Briggs Stratton SubaruHandling & Transporting OperationBlowing Operation Side Discharge Up PositionOperation Adjusting AIR DirectorSide Discharge Down Position Front Discharge PositionDisconnect Spark Plug Wire Before Servicing Unit MaintenanceReconnect Spark Plug Wire Guards Before Starting Engine Briggs & Stratton American Honda Subaru AmericaAIR Filter Cover Removal Instruction Briggs and Stratton MaintenanceAIR Filter Cover Removal Instruction Honda 8 and 13 H.P Throttle Control Cable InstallationQB1304HBW QB554HC, QB654, QB884H QB994S, QB1004, QB1304HInternational only Parts ListEngine Service and Warranty TroubleshootingSerial Plate Purchase Purchased Date From

QB1004, QB884H, QB1304H, QB994S, QB654, QB1304HBW, QB554HC specifications

The world of outdoor power equipment has seen significant advancements over the years, and among the standout products in this domain are the Billy Goat lineup of blowers and vacuums. Including models such as the QB1004, QB884H, QB1304H, QB994S, QB654, QB1304HBW, and QB554HC, this collection showcases high-performance features tailored for both residential and commercial use.

The Billy Goat QB1004 is designed with a powerful engine that provides exceptional airflow, making it perfect for large properties and professional landscaping. Its compact design allows for easy maneuverability, while the adjustable air velocity setting gives users control over the airflow to suit different cleaning tasks.

Next, the QB884H offers an ergonomic design with a padded handle and lightweight construction, reducing user fatigue during extended use. This model also boasts a robust engine that delivers high suction power, enabling efficient leaf and debris collection. Its foldable design enhances portability, making it an excellent choice for tight spaces.

The QB1304H is another remarkable machine with a focus on durability and efficiency. Equipped with advanced noise reduction technology, it operates quietly without compromising power. Its heavy-duty construction ensures longevity, even in the toughest conditions.

For users requiring a versatile tool, the QB994S stands out with its multiple attachment options. This model is engineered for easy switching between vacuuming and blowing modes, offering flexibility for various outdoor tasks. The large capacity bag minimizes downtime and enables extended use before needing to be emptied.

The QB654 model is perfect for residential use, combining practicality with performance. Its lightweight design makes it easy to handle, while the strong suction power effectively collects leaves and debris with minimal effort.

The QB1304HBW is specifically created for those who demand high productivity from their equipment. This model features a high dump capability, allowing for easy disposal of collected debris without the need for cumbersome manual handling. Its robust engine ensures optimal performance under heavy workloads.

Finally, the QB554HC, known for its compact design, delivers exceptional performance without sacrificing ease of use. The high-powered engine contributes to increased efficiency, making it a favorite among homeowners and professional landscapers alike.

In summary, the Billy Goat blowers and vacuums, including the QB1004, QB884H, QB1304H, QB994S, QB654, QB1304HBW, and QB554HC, combine innovative technology with user-friendly features. Whether for residential lawns or commercial properties, these machines are designed to meet the diverse needs of outdoor cleaning and maintenance, ensuring that users can tackle any job with confidence.