Troubleshooting, Warranty Claim Procedure

FORCE 6 BLOWER Owner’s Manual

TROUBLESHOOTING

Problem	Possible Cause	Solution
Abnormal vibration.	· Loose or out of balance impeller.	· Check impeller and replace if required.
	· Debris in impeller.	· Clear debris with compressed air or a
	· Loose engine.	backpack blower (see below pictures).*
	· Loose engine.	· Check engine.

Engine will not start.	· Engine not in full choke position.	· Check choke position.
	· Out of gasoline or bad, old gasoline.	· Check gasoline.
	· Spark Plug wire disconnected.	· Connect spark plug wire.
	· Gas valve off.	· Turn on gas valve.
	· Dirty air cleaner.	· Clean or replace air cleaner. Contact a
		qualified service person.
Engine is locked, will not pull	· Engine problem .	· Contact an engine servicing dealer for
over.		engine problems.
Aim -N-Shoot TM lever sticking	· Debris stuck around cone	· Clean debis
	· Cone adjustment knob too tight	· Apply silicone based lubricant to
	· Adaptor mount nut (item 43) too	pivot points
	tight	· Loosen manual adjustment knob
		· Loosen nut

*Using compressed air, or a Backpack blower, you can loosen or free debris easily from the impeller and housing, which can cause wear and tear on the machine. You can manually remove debris by taking off the front housing. Note: Always disconnect the sparkplug when servicing.

When servicing engine refer to specific manufacturers engine owner's manual. Engine warranty is covered by the specific engine manufacturer. If your engine requires warranty or other repair work contact your local servicing engine dealer. When contacting a dealer for service it is a good idea to have your engine model number available for reference (See table page 3). If you cannot locate a servicing dealer in your area you can contact the manufacturers national service organization.

To reach:

Subaru America: 800-277-6246

WARRANTY CLAIM PROCEDURE

Should a BILLY GOAT ® machine fail due to a defect in material and/or workmanship, the owner should make a warranty claim as follows:

•The machine must be taken to the dealer from whom it was purchased or to an authorized Servicing BILLY GOAT Dealer.

•The owner must present the remaining half of the Warranty Registration Card, or, if this is not available, the invoice or receipt.

•The Warranty Claim will be completed by the authorized BILLY GOAT Dealer and submitted to their respective BILLY GOAT Distributor for their territory Attention: Service Manager. Any parts replaced under warranty must be tagged and retained for 90 days. The model number and serial number of the unit must be stated in the Warranty Claim.

•The distributor service manager will sign off on the claim and submit it to BILLY GOAT for consideration.

•The Technical Service Department at BILLY GOAT will study the claim and may request parts to be returned for examination. BILLY GOAT will notify their conclusions to the distributor service manager from whom the claim was received.

•The decision by the Technical Service Department at BILLY GOAT to approve or reject a Warranty Claim is final and binding.

For online product registration go to www.billygoat.com

Part No 441161

Form No F042808A

EX17D50012 specifications

The Billy Goat EX17D50012 is a powerful and versatile outdoor equipment designed for demanding lawn care and landscaping tasks. Known for its robust build and functionality, this equipment serves both professional landscapers and avid gardeners looking for reliable performance.

One of the key features of the EX17D50012 is its exceptional engine performance. Equipped with a 17-horsepower engine, this model provides ample power to handle heavy-duty tasks such as lawn vacuuming, leaf collection, and debris clearing. This engine boasts a durable design, ensuring longevity and reduced maintenance needs.

Another notable characteristic of the EX17D50012 is its efficient suction system. The equipment features a high-capacity impeller that effectively collects various debris types, from leaves to grass clippings. The large 50-gallon debris bag, combined with its superior suction capability, allows users to cover large areas without frequent stops to empty the bag.

In terms of technology, the Billy Goat EX17D50012 integrates advanced engineering for better maneuverability and ease of use. The equipment is designed with a self-propelled feature, which makes it easier to navigate through different terrains and surfaces. The adjustable speed settings allow users to customize their pace according to the specific job requirements, enhancing operational efficiency.

The design of the EX17D50012 prioritizes user comfort. It comes with ergonomic handles that reduce strain during extended use and provide better control over the equipment. Furthermore, its compact dimensions make it easy to store and transport, addressing the needs of users with space constraints.

Durability is another highlight of the Billy Goat EX17D50012. Constructed from high-quality materials, this device withstands the rigors of outdoor work and adverse weather conditions. Its reinforced frame helps protect against wear and tear, ensuring it remains a reliable piece of equipment for years to come.

In conclusion, the Billy Goat EX17D50012 stands out in the lawn care industry due to its powerful engine, efficient suction system, user-friendly features, and durable construction. Ideal for both commercial and residential use, this model offers a perfect blend of performance and convenience, making it an essential tool for effective lawn maintenance.