Billy Goat F800 owner manual Intended USE, Instruction Labels, Engine Labels

Page 6

FORCE BLOWER Owner’s Manual

INTENDED USE

This machine is designed for cleaning outdoor surfaces, where the debris can be effectively blown into a consolidated area for convenient pickup and removal.

Do not operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check for damaged or worn impeller, loose impeller bolt, loose impeller key, loose engine or lodged foreign objects. Note: See parts list for proper impeller bolt torque specifications. (See trouble shooting section on page 12).

INSTRUCTION LABELS

The labels shown below were installed on your BILLY GOAT ® FORCE Blower. If any labels are damaged or missing, replace them before operating this equipment. Item numbers from the Illustrated Parts List and part numbers are provided for convenience in ordering replacement labels. The correct position for each label may be determined by referring to the Figure and Item numbers shown.

LABEL READ OWNERS MANUAL

LABEL EAR EYE BREATHING

DANGER FLYING DEBRIS

ITEM #44 P/N890301

ITEM# 45 P/N890254

ITEM # 46 P/N 810736

LABEL EXPLOSIVE FUEL

ITEM # 43 P/N 400268

ENGINE LABELS

BRIGGS AND STRATTON

Part No 440187

6

Form No F091907C

Image 6
Contents Billy Goat Force Blower Contents About this ManualSpecifications F800 Serial Plate DataGeneral Safety Instructions and Symbols Form No F091907C Intended USE Instruction LabelsEngine Labels Packing Checklist Parts BAG Literature AssyAssembly OperationHandling & Transporting Maintenance Periodic MaintenanceTroubleshooting Warranty Claim ProcedureIllustrated Parts List Parts List F800Maintenance Record Form No F091907C