Meridian Audio DILA1080pHD What to do when these messages are displayed, Message Cause Details

Page 32

What to do when these messages are displayed

Message

Cause (Details)

 

 

No Signal DVI-D

No device is connected to the DVI terminal.

The terminal is connected but there is no signal output.

[Input the video signals.

 

 

 

When lamp time reaches 1000 hours

 

 

 

[ A message indicating “1000 h” will be displayed on the

 

1000h

 

screen.

 

 

 

 

 

 

● Press the [EXIT] button to clear the display.

 

 

EXIT

 

 

 

 

 

 

 

 

 

Lamp replacement

EXIT

At the moment when the accumulated lamp time reaches 1900 hours, a “Lamp replacement” message will be displayed. In addition, when the accumulated lamp time reaches between 1900 hours to 2000 hours, the “Lamp replacement” message will be displayed each time the projector is turned on.

●The message can be cleared by pressing the [EXIT] button or displaying the menu.

[Get ready a new lamp (lamp unit) in advance or replace as soon as possible.

Lamp replacement

Warning

EXIT

The “Warning” word appears and blinks when the accumulated lamp time exceeds 2000 hours.

The message can be cleared by pressing the [EXIT] button. However, the same message will reappear every hour. When the accumulated lamp time exceeds 2000 hours, the unit cannot be turned on again once it is turned off.

If continuous projection is performed after 2000 hours, the unit will shut down upon exceeding 2010 hours and projection will be disabled.

[Install a new lamp (lamp unit) and reset the lamp time. (☞ Pages 28 - 30)

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Home Theater Optimized About the installation place FCC Information U.S.A. onlyMachine Noise Information Germany only About burning-in of the D-ILA deviceDo not allow any unqualified person to install the unit Power cordHow To Replace The Fuse Do not cut off the main plug from this equipmentStandard for gauging replacement time of components Contents AccessoriesControls and Features Front Side/Top Surface/Left SideRear Side/Right Side/Bottom Surface Connector Panel Service TerminalSync OUT Terminal RS-232C Terminal D-sub 9 PinControl Panel Indicator Display on the Control Panel Remote Control Loading Batteries into the Remote Control Precautions for Using BatteriesOpen the back cover Load the batteriesInstalling the Projector Installation EnvironmentPrecaution for Usage Adjusting the InclinationMounting this Unit Projector and Screen InstallationPrecautions for Ceiling-mount Length of Aspect Ratio Wide Tele Screen Size and Projection DistanceProjection Screen Size Diagonal Effective Range of Remote Control Unit  When reflecting off a screen When directing remote control unit toward this unit Screen Remote Sensor Rear This unit Remote Control UnitConnecting to Various Devices Connecting to DevicesRight Side of this unit  Control from external deviceConnecting the Power Cord supplied Basic Operation Procedures Turning on the powerAdjusting zoom screen size Adjusting focusTurning off the power Pull out the power plug from the power outletHiding the image temporarily Press HideAdjustments and Settings Using Menus Set up MenuMenu Structure Options MenuButton This Unit Remote Control Unit Function Menu Operation ButtonsPress / to select an adjustment item To change the setting valueMenu Configuration Image adjust MenuSet up Menu Options MenuPress / to select Set up, followed by pressing Enter Screen MaskingProject image onto the screen Press the Menu buttonPicture Shift Setting Press / to select Options, followed by press- ing EnterAbout Lamp Replacement Procedure for Lamp ReplacementReplacing the Lamp Light-source Lamp and Lamp Usage TimeLoosen the screws on the lamp unit To ensure the lamp time has been reset Resetting Lamp TimeInsert plug into the power outlet Cleaning and Replacing the Filter What to do when these messages are displayed Message Cause Details About warning indicators IndicatorPlease follow the procedures below  Actions to be taken upon warning indicationsTroubleshooting Pin No Signal Name Terminal DescriptionPin Arrangement  RS-232C TerminalRS-232C External Control Special parameters External control command tableOperation mode Only Asking command is possible Specifications Side Front  Dimensions Unit mm TopBottom Faroudja Warranty Statement

DILA1080pHD specifications

The Meridian Audio DILA1080pHD sets a new standard in the realm of high-definition projectors, seamlessly combining cutting-edge technology with an elegant design. Meridian Audio, a brand synonymous with high-fidelity sound and visionary audio-visual solutions, ensures that the DILA1080pHD meets the demands of both home cinema enthusiasts and professional settings.

At the heart of the DILA1080pHD is its DILA (Direct Imaging Liquid Crystal on Silicon) technology, which delivers vivid colors and exceptional contrast. This innovative system utilizes a reflective liquid crystal layer, enabling the projector to produce images with remarkable detail and depth. The 1080p resolution ensures that every frame is sharp, making it ideal for showcasing high-definition content, from movies to gaming.

One of the standout features of the DILA1080pHD is its superior brightness output. With a lumens rating designed to perform optimally in both dimly lit and well-lit environments, this projector guarantees a vibrant viewing experience. Coupled with an advanced lens system, which allows for clear image projection from various distances, users can enjoy flexibility in installation without compromising on picture quality.

The DILA1080pHD also supports a diverse range of input formats, making it compatible with many devices. Whether for a home theater setup, corporate presentations, or educational purposes, the projector can be connected via HDMI, VGA, or component inputs, ensuring versatility in its application.

Another hallmark of this projector is its exceptional color reproduction. With achromatic color processing, the DILA1080pHD achieves an impressive color gamut, ensuring that the hues in any image feel authentic, vibrant, and true to life. This level of color fidelity enhances the overall viewing experience, making it ideal for cinematic experiences.

Designed with quiet operation in mind, the DILA1080pHD incorporates advanced cooling technologies to minimize noise, allowing users to immerse themselves fully in audio-visual content without distractions.

The elegant and compact design of the projector further contributes to its appeal, making it suitable for various environments, from modern living rooms to professional conference rooms. The intuitive user interface simplifies navigation and set-up, allowing users to focus on what matters most: the quality of their viewing experience.

In summary, the Meridian Audio DILA1080pHD combines groundbreaking DILA technology, high-definition resolution, superior brightness, and exquisite color reproduction to create a projector that stands out in both performance and aesthetics. Its versatility and advanced features make it an exceptional choice for any setting, marking it as a valuable addition to the Meridian Audio lineup.
Top Page Image Contents