To Be Specified Required | American Standard 2425.118W instruction

HAMPTON™ 5’ INTEGRAL APRON WHIRLPOOL

HIGH GLOSS ACRYLIC

❏2425.218W Whirlpool featuring System I Left Hand Drain Outlet

❏2425.118W Whirlpool featuring System I Right Hand Drain Outlet

•Acrylic with fiberglass reinforcement

•Integral apron with removable access panel

•Integral three-sided, tiling / water retention flange

•Form-fitted backrest

•1.5 HP single speed, self-draining pump/motor with dry run seal

•Factory-installed power cord with plug

•Eight multi-directional and flow-adjustable jets including:

-Two Ideal-flow jets

-Four body massage jets

-Two recessed back-rest jets

•Deck-mounted air switch On/Off

•Two silent air volume controls

•Quick Connect Safe-T-Heater connection system

•Factory installed and tested whirlpool system

StayClean™ Whirlpool Massage featuring System I

❏2425.218WC Whirlpool featuring System I Left Hand Drain Outlet

❏2425.118WC Whirlpool featuring System I Right Hand Drain Outlet

•Same as above except with the StayClean™ whirlpool system featuring Antimicrobial AlphaSan®

Nominal Dimensions:

60” x 32” x 21-1/2” (1524 x 813 x 546mm)

Compliance Certifications -

Meets or Exceeds the Following Specifications:

•Underwriters Laboratories - Hydromassage Bathtubs UL 1795

•ASME A112.19.7M for Whirlpool Appliances

•ANSI Z124.1 for Plastic Bathtubs

•ASTM E162 for Flammability

•NFPA 258 for Smoke Density

❏Color:

❏Bath Faucet: (specify finish)

❏Bath Drain: 1583.470 (specify finish)

❏Safe-T-Heater*: 9075.120

❏Bath Caddie: 9533.100 (in Chrome only)

❏Jet Trim Ring Kit: 9860.200-two per kit (specify finish)

For color/finish availability and other faucet choices, please see the Product Selector and Pricing Guide.

*NOTE: the Safe-T-Heater is designed to maintain water temperature during operation. It will not heat cold water to desired bathing temperature.

NOTE: Roughing-in dimensions and product specifications shown on reverse side of page.

BV-19

3/03	© 2003 American Standard Inc.