Whirlpool featuring System | American Standard 2675.018C instruction

COLONY 5’™

HIGH GLOSS ACRYLIC

•Acrylic with fiberglass reinforcement

•Dual, molded-in armrests at lumbar area

•1.0 HP single speed, self-draining pump/motor with dry run seal

•Factory installed power cord with plug

•Six multi-directional and individually flow-rate adjustable color-coordinated jets

•Deck-mounted, color-coordinated air switch On/Off control

•Single, color-coordinated air volume control

•Factory installed and tested whirlpool system

•Same as 2675.018 except with the StayClean™ whirlpool system featuring Antimicrobial AlphaSan®

•Same as above without whirlpool system

Nominal Dimensions: 1524 x 832 x 502mm (5’ x 32-3/4” x 19-3/4")

Compliance Certifications -

Meets or Exceeds the Following Specifications:

•Underwriters Laboratories - Hydromassage Bathtubs UL 1795

•ASME A112.19.7M for Whirlpool Appliances

•ANSI Z124.1 for Plastic Bathtubs

•ASTM E162 for Flammability

•NFPA 258 for Smoke Density

To Be Specified - Required:

❏Color:

❏Bath Faucet: (specify finish)

❏Bath Drain: 1583.470 (specify finish)

❏5 Foot Acrylic Apron: 9260.018 (specify color)

❏5 Foot Apron: 9360.018 (specify color)

❏Grab Bar Kit: 9822.200-two per kit (specify finish)

❏Jet Trim Ring Kit: 9860.200-two per kit (specify finish)

❏Universal Tile Bead Kit: 751755-100

NOTE: Roughing-in dimensions and product specifica-tions shown on reverse side of page.

For color/finish availability and other faucet choices, please see the Product Selector and Pricing Guide.

BV-32

Revised 1/99