American Standard 2703.XXXW Series installation instructions Installation Instructions

Page 1

ELLISSE BUILT-IN™ 2703.XXXW

2705.XXXW

SERIES WHIRLPOOL

HIGH GLOSS ACRYLIC SHOWN LESS ALL FITTINGS

INSTALLATION INSTRUCTIONS

 

 

 

 

 

1524mm

 

 

 

 

 

 

229mm

(60)

 

 

WATER RETENTION

SEE FITTING

 

 

 

 

(9)

 

 

 

 

 

 

 

 

 

 

FLANGE (3) SIDES

SPECS FOR

 

 

 

 

 

 

19mm

 

FINISHED

 

 

 

 

DIMENSION

 

 

 

 

 

 

WALL LINE

 

 

 

 

(3/4)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

387mm

 

 

 

 

 

 

 

 

 

(15-1/4)

 

 

 

 

 

 

PUMP

 

 

 

 

 

 

 

 

 

813mm

 

 

 

 

 

 

 

 

 

(32)

 

 

 

229x305mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

C/L OF

 

(9x12) FLOOR

 

 

 

 

 

 

 

CUTOUT

 

 

 

 

 

SUPPLIES

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

51mm

 

 

 

 

 

ON/OFF SWITCH

 

 

 

 

ALT. PUMP

 

 

 

PROVIDE ACCESS

 

 

 

(2)

 

 

 

 

 

 

 

C/L OF DRAIN

 

LOCATION

 

 

TO PUMP FOR SERVICING

 

 

 

OUTLET

 

 

 

 

 

ON ALL INSTALLATIONS

 

 

 

C/L OF

 

 

 

FINISHED WALL

 

 

 

SHOWER ARM

 

C/L OF

 

 

 

 

1651-1981mm

 

 

 

 

 

 

 

 

 

 

 

SAFE-T-HEATER

 

VALVES

 

 

 

 

(65-78)

 

 

REMOVABLE BLANK

 

 

 

 

 

 

OPTIONAL

 

102mm

 

 

C/L OF

 

WATER

 

 

 

 

 

305mm

(4)

 

 

 

SPOUT

 

RETENTION

38mm

(12) OPT.

 

 

 

 

 

 

FLANGE

(1-1/2)

TOP

 

 

 

 

 

LEVELING

 

OF

 

51mm

 

 

 

 

STRINGER

UNDERSIDE

DECK

 

 

 

 

 

 

95mm (2)

C/L OF

 

 

 

NOT FOR

OF DECK

 

(3-3/4)

OVERFLOW

 

 

 

SUPPORT

 

546mm

 

 

 

 

 

ROUGH

533mm

 

(21-1/2)

 

 

 

 

 

FLOOR

 

 

 

 

INTEGRAL

 

 

 

(21)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FEET

 

 

 

 

 

 

 

 

ROUGH

1-1/2 N.P.T.

 

 

 

 

 

 

 

 

FLOOR

 

38mm

 

 

83mm

 

 

 

 

THREADS

 

 

 

 

 

 

 

 

(1-1/2)

 

 

(3-1/4)

 

 

 

 

1-1/2 O.D.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

THANK YOU...

for selecting an American Standard bath. Your new bath is shipped to you after careful inspection. The whirlpool version is completely assembled with pump, motor, and system piping. All you need to finish the installation are your selected fittings and electrical connections for a whirlpool.

To insure maximum performance and pleasure from this product, please follow the instructions and cautions.

List of Optional Components (not included):

Apron Kit*

Safe-T-Heater 9075.120*

* see your American Standard Distributor

List of Required Components (not included):

Drain 1583.470*

• Bath Filler*

* see your American Standard Distributor

List of Required Tools and Supplies:

Tools

Supplies

Level

Nails

Tape Measure

Putty

Pipe Wrench

Caulking (waterproof)

Slip Joint Pliers

1 x 3 or 2 x 2

Screw Driver

 

Stringers

Standard

Drop Cloth

 

Woodworking Tools

15 or 20 amp GFCI

Personal Safety

 

Outlet

 

Equipment

Cement, Plaster,

Caulking Gun

 

Grout

GENERAL INSTALLATION INFORMATION

TAILPIECE

GENERAL SPECIFICATIONS FOR 2703/5 WHIRLPOOL

INSTALLED SIZE

 

 

 

 

 

 

 

 

60 x 32 x 21-1/2 In. (1524 x 813 x 546mm)

WEIGHT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

141 Lbs. (63 Kg.)

WEIGHT w/WATER

 

 

 

 

 

 

 

 

643 Lbs. (292 Kg.)

GAL. TO OVERFLOW

 

 

 

 

 

 

 

 

 

 

60 Gal. (277 L)

WHIRLPOOL MIN. OPERATING VOL.

 

 

 

 

 

 

 

 

50 Gal. (189 L)

 

 

 

 

 

 

 

 

BATHING WELL AT SUMP

 

 

 

44-1/2 X 20 In. (1130 mm X 508 mm)

BATHING WELL AT RIM

 

 

 

58 X 26-1/4 In. (1473 mm X 667 mm)

WATER DEPTH TO OVERFLOW

 

 

 

 

 

 

14-1/2 In. (368 mm)

 

 

 

 

 

 

FLOOR LOADING

 

 

 

 

 

48 Lbs./Sq.Ft. (231 Kgs./Sq.m)

(PROJECTED AREA)

 

 

 

 

 

 

 

 

 

 

 

 

PTS.

 

 

 

 

 

 

20.8

CUBE (FT3)

 

 

 

 

35.3

 

 

 

 

 

 

 

WHIRLPOOL ELECTRICAL SPECIFICATIONS

SYSTEM I PUMP

 

 

 

 

 

 

1.6 HP, 9.7 AMPS, 120V.

 

 

 

 

 

SYSTEM II PUMP

 

 

 

 

 

 

2.1 HP, 15.6 AMPS, 120V.

 

 

 

 

 

 

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor immediately.

After inspection and during installation, protect the bath from construction damage. After installation, and before enclosing with wallboard, tile, etc., water test the unit and check for leaks.

If a whirlpool, do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump, motor, or piping system.

Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead (required for recess installations).

Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.

WARNING! Do not lift whirlpool by the piping har- ness at any time.

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

© American Standard Inc. 2003

752352-100 REV. HAll product names listed herein are trademarks of American Standard Inc. unless otherwise noted.

Image 1
Contents General Installation Information Installation InstructionsStud Flange Bracket Installation Framing and InstallationElectrical Installation Instructions Wall TIMER-1.6HP Models onlyHorsepower Models Whirlpool MountedPost Installation CLEAN-UP Wire Selection GuideDrain Connection and System Test Harsh Chemicals should Never be Used on Acrylic Surfaces