American Standard 2771E installation instructions Thank YOU, General Installation Information

CADET ELITE™ 5' x 36"

HIGH GLOSS ACRYLIC SHOWN LESS ALL FITTINGS

2771E SERIES

WHIRLPOOL/BATHING POOL

INSTALLATION INSTRUCTIONS

					PROVIDE ACCESS TO PUMP FOR
					SERVICING ON ALL INSTALLATIONS
					1524 mm
			305 mm	(60)
				RECOMMENDED FITTING LOCATION
235 mm		(12)
					64 X 330mm (2-1/2 x 13")
(9-1/4)
	19 mm				FOR PIER OR ISLAND
	(3/4)				INSTALLATIONS ONLY

FINISHED

THANK YOU...

for selecting an American Standard bath. Your new bath is shipped to you after careful inspection. The

SEE FITTING SPECS FOR DIMENSIONS

WALL

whirlpool version is completely assembled with pump, motor, and system piping. All you need to finish the installation are your selected fittings and electrical

		229 mm
		(9)
914 mm						ON/OFF
					PUMP	SWITCH
(36)		CUTOUT IN FLOOR
457 mm
		FOR DRAIN
(18)
C/L OF	57 mm		(8) JETS		(2) AIR VALVES	OUTLINE OF CUTOUT
SUPPLIES	(2-1/4)			ALT. FITTING		1486 mm x 876 mm
						(58-1/2 X 34-1/2)
	C/L OF DRAIN			LOCATION #1
					C/L OF
					SHOWER ARM
OPTIONAL TO
FINISHED FLOOR					C/L OF
USUALLY BETWEEN
1651 & 1981mm					VALVES
(65 & 78)	C/L OF
					C/L OF
	OVERFLOW		305 mm
	38 mm		(12)		SPOUT	■ LEVELING
	(1-1/2)
			102 mm		IN-LINE HEATER	STRINGER
	76 mm
					REMOVABLE	NOT FOR
	(3)		(4)
					BLANK	SUPPORT
	502 mm
	(19-3/4)					464 mm
	ROUGH					(18-1/4)
	FLOOR
	INTEGRAL		1-1/2 N.P.T.M.
	SUPPORT		THREADS		70 mm
	FEET	1-1/2 O.D.TAILPIECE			(2-3/4)
					117 mm
					(4-5/8)

GENERAL SPECIFICATIONS FOR 2771E WHIRLPOOL

INSTALLED SIZE					60 x 36 x 19-3/4 In.
			(1524mm x 914 mm x 502mm)
WEIGHT							95 Lbs. (43 Kg.)
WEIGHT w/WATER						587 Lbs. (267 Kg.)
GAL. TO OVERFLOW							59 Gal. (224 L.)
MIN. OPERATING GAL.							48 Gal. (182 L.)
BATHING WELL AT SUMP			40 x 22 In. (1016mm x 559mm)
BATHING WELL AT RIM			52 x 29 In. (1321mm x 737mm)
WATER DEPTH TO OVERFLOW						13-1/4 In. (337mm)
FLOOR LOADING		39 Lbs./Sq. Ft. (188 Kgs/Sq. m.)
(PROJECTED AREA)
PTS.								23.8
CUBE (FT3)									44.5
	WHIRLPOOL ELECTRICAL SPECIFICATIONS
PUMP				1.6 HP, 9.7 AMPS, 120V.

connections for a whirlpool.

To insure maximum performance and pleasure from this product, please follow the instructions and cautions.

List of Optional Components (not included):

•Flex-Jet Pulse Jet Kit*

•Flex-Jet Soft Jet Kit*

•E-Z-Install Heater*

•Tile Bead Kit*

•Apron Kit*

List of Required Components (not included):

•	Drain*	• Bath Filler*
* see your Home Depot Retailer
List of Required Tools and Supplies:
Tools		Supplies
		•	Nails
•	Level	•	Putty
•	Tape Measure	•	Caulking (waterproof)
•	Pipe Wrench	•	1 x 3 or 2 x 2
•	Slip Joint Pliers		Stringers
•	Screw Driver	•	Drop Cloth
•	Standard	•	15 amp GFI
	Woodworking Tools		Outlet
•	Personal Safety	•	Cement, Plaster,
•	Equipment		Grout
	Caulking Gun

GENERAL INSTALLATION INFORMATION

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor immediately.

After inspection and during installation, protect the bath from construction damage. After installation, and before enclosing with wallboard, tile, etc., water test the unit and check for leaks.

Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump, motor, or piping system.

Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead (required for recess installations).

Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.

WARNING! Do not lift whirlpool by the piping harness at any time.

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

© American Standard Inc. 2002

752860-100 Rev. BAll product names listed herein are trademarks of American Standard Inc. unless otherwise noted.