Drain Connection and System Test

Using recommended drain assembly, connect whirlpool drain to waste line in accordance with the drain assembly instructions. Tighten all drain joints securely. Check the pump couplings and make sure they are hand-tight. Clean the whirlpool and fill with water to a point " above the top of the highest jet. Recheck the pump couplings and make certain that they are not leaking. (Although the pump couplings are factory tightened and inspected, some loosening may have occurred during transit.) Make sure the whirlpool is connected to the electrical supply and turn the whirlpool on. Check for leaks around all piping connections while the whirlpool is running.

POST INSTALLATION CLEAN-UP

Remove all construction debris from bath. Tile grout can be removed with a wooden popsicle stick or tongue depressor. Do not use wire brushes or any other metal implement on bath surface.

Post installation clean-up generally can be completed using warm water and liquid dishwashing detergent. Stubborn dirt or stains may be removed using granular Spic and Span® mixed with water.

Painter's naphtha can be used to remove excess adhesives and/or wet oil-base paint.

AFTERCARE and CLEANING

•The high gloss surface is resistant to impact and chemicals and will retain its lasting luster with proper care and maintenance.

•Always fill the tub with temperate water. Excessively hot water may cause surface damage

•Remove bath mat after use and hang to dry. Allowing bath mat to dry in the tub may cause surface damage.

•Clean after use with a mild liquid household detergent cleaner. Do not use Lestoil, Lysol Disinfectant (spray or concentrate), or Lysol Basin, Tub and Tile Cleaner, Windex, Mr. Clean, Dow Disinfectant Bathroom Cleaner, or cleaning products in aerosol cans.

HARSH CHEMICALS SHOULD NEVER BE USED ON ACRYLIC SURFACES.

•Do not use wire brushes, knives or sharp objects to remove stains, cigarette tar deposits,or other surface blemishes.

•Abrasive cleaners or powders must not be used, since they will dull the surface. If the glossy surface looses

its sheen, dulled areas can be restored by rubbing with a white "automotive type" polishing compound and waxing with a "liquid wax."

•Do not wax areas where you walk or stand.

•Do not allow nail polish remover, acetone, dry cleaning fluid, paint remover or other solvents to come into contact with the surface.

•Clean the surrounding surface immediately after using caustic drain cleaners.

•Burning cigarettes will damage the surface.

•Should damage to the fixture occur, repairs can be made quickly and easily.

Your distributor or builder can provide details.

• Do not permit drain cleaner to enter the circulation system.

CIRCULATION SYSTEM CLEANING-PURGING PROCEDURES

STEP 1. Once every month purge and clean the circulating system. Fill whirlpool with warm water and add two teaspoons of dishwasher detergent and one-half cup of house hold bleach.

STEP 2. Activate whirlpool system in accordance with operating instructions or two minutes.

STEP 3. Drain and refill whirlpool with cool water and circulate for additional five minutes.

STEP 4. Drain whirlpool completely.

13	753737-100 Rev. B

2771VA specifications

The American Standard 2771VA is a premium one-piece toilet designed to blend modern aesthetics with high functionality. Known for its sleek lines and contemporary design, this toilet not only enhances the visual appeal of any bathroom but also incorporates advanced features that promote efficiency and comfort.

One of the standout characteristics of the 2771VA is its WaterSense certification. This certification ensures that the toilet uses 20% less water than traditional models, typically averaging just 1.28 gallons per flush. This efficient water usage minimizes environmental impact while maintaining strong flushing performance, making it an eco-friendly choice for homeowners looking to reduce their water consumption.

The toilet is equipped with American Standard’s proprietary EverClean surface. This innovative feature promotes hygiene by creating a smooth, ionized surface that helps inhibit the growth of stain and odor-causing bacteria, mold, and mildew. As a result, the toilet remains cleaner for longer periods, reducing the time and effort required for maintenance.

In terms of flushing technology, the 2771VA employs a powerful and reliable flush system that features a siphon jet action. This design creates a whirlpool effect that ensures the entire bowl is effectively cleaned with each flush. The toilet also boasts a larger trapway, which helps prevent clogs and blockages, ensuring a hassle-free experience.

Comfort is another important aspect of the 2771VA. It is designed with a higher toilet bowl height that caters to the needs of a wider range of users, including those with mobility issues and the elderly. This comfort height makes sitting down and standing up easier, providing an overall more enjoyable experience.

Installation is made simple with the toilet's one-piece construction, which eliminates the need for a separate tank and bowl connection. This design not only simplifies the installation process but also contributes to a seamless look that is easy to clean.

In summary, the American Standard 2771VA combines innovative technology, eco-friendliness, and user comfort in a stylish one-piece design. Its efficient water usage, hygiene-enhancing features, powerful flush system, and comfort height make it an excellent choice for any modern bathroom. Whether you're renovating an old space or designing a new one, the 2771VA stands out as a dependable and aesthetically pleasing option.