LightSpeed Technologies 780iR user manual HM-70 Operating Instructions

Page 15

HM-70 Operating Instructions

Charging

Rechargeable batteries are pre-installed.

a.Turn off the HM-70 by sliding the power switch all the way down.

b.Connect one end of the charging cable to one of the MIC CHARGE jacks on the back panel of the LES 780iR.

Connect the other end of the charging cable to the charging jack on the side of the HM-70. The power indicator LED will glow green when the charging cable is connected and charging correctly.

c.The batteries fully charge in 8 to 12 hours. Once the batteries are charged, remove the charger cable from the HM-70.

NiMH batteries maintain their charge for a full day of normal classroom use. Always turn the HM-70 off when not in use.

Operation

The Channel A/B switch is located inside the battery compartment. The switch is set to Channel B at the factory.

a.Slide the power switch on the side of the HM-70 all the way up. The power indicator LED will glow red and stay on. (There is a center MUTE position if you wish to leave power on but temporarily cease transmission of your voice.)

b.Do not adjust the audio gain adjuster that is located in the battery compart- ment. It has been preset by factory technicians and is not intended as a volume control.

Holding and Positioning

a.When holding the HM-70, grip the barrel in the center, silver section below the power switch. Do NOT grip the HM-70 around the bottom, covering the black infrared sensors encircling the base. This interrupts signal transmission from the microphone to the receiver. Speak directly into the top of the microphone at a normal level, holding the head about 2 inches from your mouth, no lower than chin height.

[13]

Image 15
Contents E R ’ S M a N U a L Front Panel Controls Rear Panel Controls System Operation LES 780iR Infrared Classroom Amplification System Page Follow instructions and mount speakerss System InstallationSuspended Ceiling Mount Clip the LightMic to the lavaliere Consult the troubleshooting guide for further assistancePage Page Check that System OperationLT-70 LightMic Microphone/Transmitter This is not covered by the warranty Ensure the LES 780iR is switched on Two-color LED indicator is located Channel Select Switch This switchOr Channel B. This switch is set to Power/Charge LED Indicator ThisHM-70 Operating Instructions Rechargeable batteries are pre-installedInput from External Audio Equipment For properly Tips on Using Classroom AmplificationFive-Year Limited Warranty to Original Purchaser All your repair/replacement needsInputs Amplifier SpecificationsOverall System Specifications Receiver SpecificationsKeep the LES 780iR at least 6 feet away from computers Troubleshooting GuideOptional Noise-canceling Headset Microphone to Individual Components and Optional AccessoriesRechargeable AA Battery Nickel Metal Hydride Power Supply/Battery Charger for 780iRWall-Mounting Shelf

780iR specifications

LightSpeed Technologies has engineered the 780iR, a standout product that combines cutting-edge innovation with functionality tailored for modern audio and communication needs. Designed with precision, the 780iR is ideal for educational spaces, corporate environments, and public venues where clear and effective communication is paramount.

One of the most notable features of the 780iR is its advanced infrared transmission technology. This technology ensures that audio signals are transmitted with minimal interference, providing crystal-clear sound quality. The infrared system is particularly beneficial in environments prone to electronic interference, as it operates in a spectrum that avoids typical RF congestion. This makes the 780iR an excellent choice for schools and organizations striving for reliable audio performance.

The 780iR also boasts exceptional adaptability with multiple channel options, allowing users to select the best frequency for their specific setting. This is especially useful in larger venues where multiple audio systems might operate simultaneously. Users can effortlessly switch channels to maintain optimal performance, avoiding potential overlaps and disruptions.

Another strong suit of the 780iR is its user-friendly interface. With straightforward controls, educators and presenters can easily adjust volume levels, select channels, and manage audio settings without needing extensive technical knowledge. This accessibility ensures a seamless experience, allowing users to focus on delivering their message rather than grappling with complicated technology.

In terms of design, the 780iR is both sleek and durable. Constructed with resilient materials, it is built to withstand the rigors of frequent use in various environments. Its compact design allows for easy placement in different locations, be it mounted on walls or positioned on desks.

Additionally, the 780iR is compatible with various audio sources, including microphones and other audio devices, enhancing its versatility. This compatibility enables seamless integration into existing audio-visual setups, making it a valuable addition to any technology ecosystem.

In summary, LightSpeed Technologies’ 780iR represents a fine blend of advanced technology and practical application, making it an excellent investment for those seeking superior audio performance in diverse settings. With its infrared transmission, user-friendly controls, adaptable channels, robust construction, and compatibility with multiple devices, the 780iR stands out as a leader in modern communication technology. Whether in classrooms, conference rooms, or public spaces, the 780iR delivers unparalleled clarity and reliability, ensuring that every voice is heard.