Typical Pier Type Installation

INSTALLATION AND FRAMING INSTRUCTIONS

The variety of installations possible for this whirlpool may require framing procedures other than those shown. Locate studs as required. Ensure roughing-in dimensions are proper, plumb and square. Provisions must be made in all installations for an access opening for servicing the pump, blower and controls. It is strongly recommended that an additional opening be provided for access to the drain components.

NOTE: The apron should not be used as the primary access opening.

1.Position the whirlpool into the installation opening and level the deck, shimming the integral support feet as necessary. Mark the ﬁnal position of the underside of the deck by tracing a line on to the studs (see Figure 1).

2.Remove the whirlpool and attach a 2 x 4 stringer to the studs, with the top of the stringer touching the traced line. The rim of the bath MUST NOT support weight.

3.Install drain components to the whirlpool following the manufacturers instructions. Before replacing your whirlpool for ﬁnal installation, be certain that an opening has been provided in the sub-ﬂoor for the drain. See the roughing-in drawing for suggested opening size and location dimensions.

4.Replace whirlpool and re-shim the integral support feet, shimming the entire length of the support feet. Secure the shims using construction adhesive, silicone, mortar or equivalent materials. While not a necessity, the use of a foundation base consisting of cement (e.g. Sakrete), mortar, or grout will help provide a solid and secure installation.

FIG. 1

533mm

(21)

TILE

BEAD

STRIP

TILE

WALLBOARD

SEALANT

BATH

ADHESIVE

LEVELING

STRINGER

NOTE: Tile bead kit not included and must be purchased separately.

TYPICAL RECESS INSTALLATION

533mm			m
(21)	10m			)						305mm
(21)	10		/4							305mm
		-3					m
	39					m			)	(12)
	(			0					)	(12)
				6				4
			0				/			H
			1			3				H
			(		-		WIDT
			(	1			WIDT
				4
	1518mm			B
	1518mm		TU
	(59-3/4)		LEVELING
			STRINGERS
										610 mm
										(24)

AS DESIRED

1019mm (40-1/8)

CUTOUT

1473mm

(58)

CUTOUT

533mm

(21)

305mm

(12)

DESIRED

LEVELING

SURFACE

610mm

WATERPROOF SEALANT

(24)

UNLESS AN ACCESS OPENING OF AT LEAST 12" X 24" (305 X 610MM) IS PROVIDED, WARRANTY SERVICE WILL NOT BE PERFORMED.

ACCESS PANEL

BATH

UNLESS AN ACCESS OPENING OF AT LEAST 12" X 24" (305 X 610MM) IS PROVIDED, WARRANTY SERVICE WILL NOT BE PERFORMED.

753026-100 Rev. H

(2)

2748.XXXX specifications

The American Standard 2748.XXXX is a standout model in the world of bathroom fixtures, revered for its blend of functionality, style, and innovative technology. Designed with the modern homeowner in mind, this particular bathtub showcases a thoughtfully crafted design that exudes elegance while ensuring maximum comfort for users.

One of the main features of the 2748.XXXX is its spacious size. Measuring 48 inches in length, it provides ample room for relaxation, making it ideal for soaking away the day's stresses. The deep basin offers an immersive experience that can transform any bathroom into a personal retreat. Its ergonomic design ensures that users can recline comfortably without feeling cramped, enhancing the overall bathing experience.

Another keen attribute of the 2748.XXXX is its construction quality. Made from high-quality acrylic, the bathtub is not only lightweight but also durable and resistant to chipping, scratching, and fading. This ensures that the bathtub retains its aesthetic appeal over time while standing up to the rigors of everyday use. The smooth, non-porous surface is easy to clean and maintain, making it a practical choice for busy households.

In terms of technology, the American Standard 2748.XXXX incorporates the innovative EverClean surface. This unique feature helps inhibit the growth of stain and odor-causing bacteria, mold, and mildew, allowing you to enjoy a cleaner bathing environment with less upkeep needed. Additionally, many models in this range are designed for easy installation, integrating seamlessly into various bathroom configurations.

Aesthetically pleasing, the 2748.XXXX is offered in a variety of colors and finishes, allowing homeowners to select a style that complements their overall bathroom decor. The sleek lines and modern design make it a versatile option for both contemporary and traditional settings.

Moreover, the American Standard brand is synonymous with reliability and quality. Backed by years of expertise and a commitment to customer satisfaction, the 2748.XXXX bathtub stands as a testament to the brand’s dedication to producing top-notch bathroom fixtures. Whether you seek relaxation or a stylish focal point for your bath space, the American Standard 2748.XXXX offers a compelling combination of features, quality, and aesthetics.