Typical Recess Installation

INSTALLATION AND FRAMING INSTRUCTIONS

The variety of installations possible for this whirlpool may require framing procedures other than those shown. Locate studs as required. Ensure roughing-in dimensions are proper, plumb and square. Provisions must be made in all installations for an access opening for servicing the pump and controls. It is strongly recommended that an additional opening be provided for access to the drain components.

NOTE: The apron should not be used as the primary access opening.

1.Position the whirlpool into the installation opening and level the deck, shimming the integral support feet as necessary. Mark the final position of the underside of the deck by tracing a line on to the studs (see Figure 1).

2.Remove the whirlpool and attach a 2 x 4 stringer to the studs, with the top of the stringer touching the traced line.

3.Install drain components to the whirlpool following the manufacturers instructions. Before replacing your whirlpool for final installation, be certain that an opening has been provided in the sub-floor for the drain. See the roughing-in drawing for suggested opening size and location dimensions.

4.Replace whirlpool and re-shim the integral support feet, shimming the entire length of the support feet. Secure the shims using construction adhesive, silicone, mortar or equivalent materials. While not a necessity, the use of a foundation base consisting of cement (e.g. Sakrete), mortar, or grout will help provide a solid and secure installation.

FIG. 1

464mm (18-1/4)

TILE

BEAD

STRIP

TILE

WALLBOARD

SEALANT

BATH

ADHESIVE

LEVELING

STRINGER

NOTE: Tile bead kit not included and must be purchased separately.

464mm					m
(18-1/4)			m
		2			)
	6				)					305mm
	7			0			m			305mm
		3					m
		(				m			)	(12)
						0			)	(12)
					0			/2
					8		1
						-
						1	WIDTH
					3
					(
1524mm					TUB
1524mm

(60)LEVELING STRINGERS

610mm

(24)

WHIRLPOOL ONLY:

UNLESS AN ACCESS OPENING OF AT LEAST 12" X 24" (305 X 610MM) IS PROVIDED, WARRANTY SERVICE WILL NOT BE PERFORMED.

TYPICAL PIER TYPE INSTALLATION

AS DESIRED

768mm
(30-1/4)
CUTOUT	1483mm
	(58-3/8)
	CUTOUT

464mm (18-1/4)

305mm

(12)

AS DESIRED

LEVELING

SURFACE

WATERPROOF

SEALANT

610mm

(24)

BATH

ACCESS PANEL

WHIRLPOOL ONLY:

UNLESS AN ACCESS OPENING OF AT LEAST 12" X 24" (305 X 610MM) IS PROVIDED, WARRANTY SERVICE WILL NOT BE PERFORMED.

752481-100 Rev. H

(2)

2770.XXXW Series specifications

The American Standard 2770.XXXW Series is a premier line of bathtubs designed to blend style, comfort, and functionality, making it a standout choice for homeowners looking to enhance their bathing experience. Known for its durable construction and sophisticated design, this series is a perfect addition to any modern bathroom.

One of the main features of the 2770.XXXW Series is its spacious design. The tub offers ample room, allowing bathers to fully immerse themselves in relaxation. The ergonomic contours provide excellent support for the back and neck, ensuring a comfortable soak. This makes it particularly appealing for those who value not just aesthetics but also the therapeutic benefits of a long, restorative bath.

The tub is constructed from high-quality acrylic material, which offers both durability and a lightweight design. Acrylic is known for its ability to retain heat, which means bathwater stays warmer for longer, enhancing the overall bathing experience. Additionally, this material provides a sleek and polished finish that is easy to clean, ensuring the tub remains looking pristine over time.

Another key characteristic of the American Standard 2770.XXXW Series is its state-of-the-art features. The series can include options for hydrotherapy, which incorporates adjustable jets that provide a soothing massage while bathing. This is a notable advantage for individuals seeking relief from muscle tension and fatigue.

The tub also features a slip-resistant surface, enhancing safety for users of all ages. This thoughtful detail showcases American Standard’s commitment to user-friendly designs that prioritize safety without compromising elegance.

Moreover, the 2770.XXXW Series is designed with modern plumbing compatibility, making installation straightforward for professionals. Its aesthetic versatility allows it to harmonize with various bathroom styles, whether it be contemporary, traditional, or somewhere in between.

In conclusion, the American Standard 2770.XXXW Series is an exceptional choice for anyone looking to upgrade their bathroom experience. With its spacious design, high-quality materials, advanced hydrotherapy options, and remarkable safety features, it epitomizes the perfect blend of luxury and practicality. Whether you seek relaxation, design elegance, or innovative functionality, this bathtub series offers it all, making it a worthwhile investment for your home.