American Standard H71, 1730.002, 1730.018C General Specifications for 1730 Bathing Pool

COLONY CORNER™

WHIRLPOOL AND BATHING POOL

HIGH GLOSS

876mm

876mm

(34-1/2)

(34-1/2)

1064mm

1514mm

(41-7/8)

1511mm

(59-5/8)

1064mm

(59-1/2)

ALT.

(41-29/32)

1546mm

PUMP

6.3mm (1/4) INTEGRAL

(60-7/8)

1549mm

(61)

TILE FLANGE (2 SIDES)

PUMP

19mm (3/4)

PROVIDE ACCESS

483mm

(19)

318mm

686mm

FOR SERVICING

PUMP & CONTROLS

(12-1/2)

(27)

686mm

686mm

1168mm

(27)

(27)

ON/OFF

(46)

SWITCH

1168mm

(6) JETS

C/L OF DRAIN

2 AIR

(46)

OUTLET

VALVES

C/L OF DRAIN

2134mm

(84)

LEVELING

OUTLET

LEVELING STRINGER

TOP OF

83mm

STRINGER

TOP OF

51mm

DECK

NOT FOR

79mm (3-1/8)

NOT FOR SUPPORT

(3-1/4)

DECK

(2)

SUPPORT

38mm

(1-1/2)

445mm

495mm

*(17-1/2)

70mm

(19-1/2)

495mm

117mm

457mm

(2-3/4)

(4-5/8)

(18)

ROUGH

(19-1/2)

56mm

FLOOR

(2-7/32)

BATH SUPPORT

38mm (1-1/2)

ROUGH

101x101mm

O.D. TAILPIECE

FLOOR

4 x 4” FEET

38mm (1-1/2) O.D. TAILPIECE

MATERIAL

BATH SUPPORT

MATERIAL

GENERAL SPECIFICATIONS FOR 1730 WHIRLPOOL

INSTALLED SIZE	60 x 60 x 19-1/2 In.(1524 x 1524 x 495mm)
WEIGHT						115 Lbs. (52 Kg.)
WEIGHT w/WATER					908 Lbs. (412 Kg.)
GAL. TO OVERFLOW							95 Gal. (360 L.)
WHIRLPOOL MIN. OPERATING VOL.							65 Gal. (246 L.)
BATHING WELL AT SUMP				30 x 50 In. (762 x 1270mm)
BATHING WELL AT RIM		45-1/2 x 63-1/2 In.(1156 x 1613mm)
WATER DEPTH TO OVERFLOW							13 In. (330 mm)
FLOOR LOADING			36 Lbs./Sq. Ft. (177 Kgs/Sq. m.)
(PROJECTED AREA)
PTS.								27.8
CUBE (FT3)									54

WHIRLPOOL ELECTRICAL SPECIFICATIONS

SYSTEM I PUMP 1.25 HP, 9.9 AMPS, 120V.

NOTES:

GENERAL SPECIFICATIONS FOR 1730 BATHING POOL

INSTALLED SIZE				60 x 60 x 19-1/2 In.
			(1524 x 1524 x 495mm)
WEIGHT						95 Lbs. (43 Kg.)
WEIGHT w/WATER					888 Lbs. (403 Kg.)
GAL. TO OVERFLOW						95 Gal. (360 L)
BATHING WELL AT SUMP			30 x 50 In. (762 x 1270mm)
BATHING WELL AT RIM	45-1/2 X 31-1/2 In. (1156 x 1613mm)
WATER DEPTH TO OVERFLOW						13 In. (330mm)
FLOOR LOADING		36 Lbs./Sq.Ft. (174 Kgs./Sq.m)
(PROJECTED AREA)
PTS.							27.8
CUBE (FT3)								54

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUMP OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.

■REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION. CONCEALED PIPING NOT INCLUDED.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

●IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING SYSTEM PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

	H72
© 2008 AS America Inc.		Revised 2/08