American Standard 7242EC dimensions 7242E specify White 020, Bone 021, or Linen, SPS 7242E

RONDO ELITE™

WHIRLPOOLS BY AMERICAN STANDARD

HIGH GLOSS ACRYLIC

RONDO ELITE™ WHIRLPOOL

Comfortable two person oval design with dual back support positions and factory installed grab bar

❏7242E (specify White 020, Bone 021, or Linen 222)

•Acrylic with fiberglass reinforcement

•2.0 HP self-draining pump/motor

with dry run seal

•Ten multi-directional and flow adjustable jets including:

Two high performance Ideal-flow™ Jets Eight interchangeable Flex-jets™

•Three silent air volume controls

•Deck-mounted On/Off control

•Complete factory installed and tested whirlpool system

❏7242EC (specify White 020, Bone 021, or Linen 222)

•Same as above with the StayClean™ whirlpool system featuring Antimicrobial AlphaSan®

Nominal Dimensions: 1816 x 1067 x 546mm (71-1/2” x 42” x 21-1/2")

Components Needed:

❏Bath Filler*: (specify finish)

❏Bath Drain: BATH-DRAIN

(specify Chrome 002, Polished Brass 099, or Satin 295)

Custom Accessories Available:

❏Pulse Jet Kit: PULSE-JET (two per kit, specify White 020, Bone 021, or Linen 222)

❏Soft Jet Kit: SOFT-JET (two per kit, specify White 020, Bone 021, or Linen 222)

❏E-Z-Install™ Whirlpool Heater - EZHEAT-100

*See American Standard Faucet Selector

Compliance Certifications -

Meets or Exceeds the Following Specifications:

•Underwriters Laboratories - Hydromassage Bathtubs UL 1795

•ASME A112.19.7M for Whirlpool Appliances

•ANSI Z124.1 for Plastic Bathtubs

•ASTM E162 for Flammability

•NFPA 258 for Smoke Density

NOTE: Roughing-in dimensions and product specifica- tions shown on reverse side of page.

NOTE: E-Z-Install™ Whirlpool Heater is designed to maintain water temperature during operation. It will not heat cold water to desired bathing temperature.

SPS 7242E

HD-006

Revised 6/03 © 2003 American Standard Inc.