Linn KOMPONENT 120 English Cleaning, Operating modes and Parameters, Symbol Mode Meaning

English Cleaning, Operating modes and Parameters

Cleaning

Disconnect the KOMPONENT 120 loudspeaker from the power supply before cleaning.

Remove dust and fingerprints with a soft, dry cloth. Avoid using domestic cleaning products on the unit.

Operating modes

SYMBOL	MODE		MEANING
		Standby	The unit is waiting for an audio signal
				In this mode the unit consumes
				minimal power. The unit will enter
				standby mode ten minutes after audio
				input ceases.
		On		The unit is fully powered-up
				The unit will enter this mode as soon
				as it receives an audio signal.
		Thermal		The unit has overheated
		Standby		During very demanding, sustained use
				the unit will go into Thermal Standby
				mode in order to allow itself to cool
				down. When in this mode the unit will
				not produce any sound. The unit will
				return to On mode when its
				temperature has dropped to its
				operating level.

KOMPONENT 120

Parameters

The KOMPONENT 120 loudspeaker is equipped with four adjustable parameters (features) that enable you to alter its performance to suit your taste.

NOTE:

The parameters can only be adjusted when the KOMPONENT 120 loudspeaker is not in standby mode.

UP DOWN FEATURE

Adjusting the parameters

To select the parameter you wish to adjust:

●Hold FEATURE.

●Repeatedly press UP or DOWN until the letter for the desired parameter appears.

●Release FEATURE.

●Repeatedly press UP or DOWN to change the setting.

NOTE:

A few seconds after releasing the last key, the display changes to

To restore the factory defaults:

●Disconnect the KOMPONENT 120 loudspeaker from the mains supply and wait for the display to go blank.

●While holding FEATURE reconnect the mains supply.

●Continue to hold FEATURE until the display shows

Owner’s Manual 4