Linn Stereo Pre-Amplifier owner manual UK users please read this important safety information

Page 24

Important Safety Information

UK users please read this important safety information

Replacing the fuse in the mains plug

This appliance is fitted with a non-rewireable 13 Amp mains plug. The plug contains a 5 Amp fuse. If the fuse has blown it can be replaced as follows:

a)Pull out the red fuse cover/carrier.

b)Remove and dispose of the blown fuse.

c)Fit a new 5 Amp BS1362 approved fuse into the carrier and push the carrier back into the plug.

Always ensure the fuse cover is fitted. If the fuse cover is missing do not use the plug. Contact your Linn retailer to obtain a replacement fuse cover. Fuses are for fire protection and do not protect against electric shock.

Mains plug replacement

Should your mains plug need replacing and you are competent to do this proceed as follows. If you are in doubt contact your Linn retailer or a competent electrician.

a)Disconnect the plug from the mains supply.

b)Cut off the plug and dispose of it safely. A plug with bared conductors is dangerous if engaged in a live socket.

c)Only fit a 13 Amp BS1363A approved plug with a 5 Amp fuse.

d)The cable wire colours or a letter will be marked at the connection points of most quality plugs.

Attach the wires securely to their respective points. The Brown wire must go to the Live pin, the Blue wire must go to the Neutral pin, and the Green/Yellow wire must go to the Earth pin.

e)Before replacing the plug top ensure that the cable restraint is holding the outer sheath of the cable firmly and that the wires are correctly connected.

WARNING

THIS APPLIANCE MUST BE EARTHED.

22

Page 23 Page 25
Image 24
Page 23 Page 25
Contents I m a x K o n t r o l Copyright and Acknowledgments Contents Klimax Kontrol Introduction Unpacking Back Panel Balanced xlr inputUnbalanced input Left in 4 unbalanced inputFront Panel Front panel displayHandset CD, PH 1, PH 2, TUN, Tape 1, Tape 2, AUXSource Setup Put unit into standby mode Enter source setup modeSelect the source setup Change the source type Change the name for the sourceTo change the character To move to the next characterChange the volume offset for the source To increase / decrease the volume offset for this sourceChange the balance offset for the source Exit source setup mode To change the unity gain setting Press Volume +To save your adjustments and exit source setup mode Change the unity gain for the sourceOperation Product Lock To turn the product lock onTo turn the product lock off To enter user options mode To adjust the setting of an optionTo store settings and exit user options mode User Options100/+10dB, 0/- ∞ to NUMERICAL, dBPage Technical Specification GeneralGuarantee and Service Technical support and informationLinn Products Limited Linn IncorporatedLinn Deutschland GmbH Important Safety Information Mains PlugsGeneral Safety Instructions UK users please read this important safety information CE Declaration of Conformity & FCC Notice CE Declaration of ConformityFCC Notice

Stereo Pre-Amplifier specifications

The Linn Stereo Pre-Amplifier represents a fusion of cutting-edge audio technology and elegant design, crafted to elevate the listening experience for audiophiles and casual listeners alike. Known for its meticulous functionality and premium build quality, the pre-amplifier embodies the commitment to excellence that Linn Products is renowned for.

At the heart of the Linn Stereo Pre-Amplifier lies its high-performance circuitry, designed to provide optimal signal integrity and low noise levels. This ensures that the audio output remains faithful to the source material, delivering crisp, clear sound reproduction. The pre-amplifier features multiple inputs, allowing users to connect various audio sources such as turntables, CD players, and streaming devices. This versatility ensures that the Linn Stereo Pre-Amplifier serves as a central hub in any audio setup.

One of the standout features of the pre-amplifier is its advanced digital-to-analog conversion technology. This state-of-the-art DAC processing guarantees that digital signals are transformed into analog audio with remarkable precision, minimizing distortion while maximizing detail. Coupled with Linn’s proprietary Exakt technology, the pre-amplifier can further enhance sound quality by optimizing the signal processing for specific speaker configurations.

The Linn Stereo Pre-Amplifier also incorporates a comprehensive range of connectivity options, including balanced XLR outputs and unbalanced RCA outputs. This adaptability allows it to integrate seamlessly with various amplification systems and speaker configurations. The pre-amplifier supports high-resolution audio formats, ensuring compatibility with modern digital sources.

In addition to its technical prowess, the Linn Stereo Pre-Amplifier features a sleek and minimalist design that complements any audio environment. The front panel is intuitively laid out, with easy-to-read indicators and a user-friendly interface that enhances the overall user experience.

Moreover, Linn's commitment to sustainability is evident in the pre-amplifier's construction, utilizing high-quality materials that not only look great but are also built to last. With longevity in mind, the pre-amplifier can be easily upgraded through firmware updates, ensuring that users benefit from future technological advancements without needing to replace the entire unit.

In summary, the Linn Stereo Pre-Amplifier is a meticulously engineered piece of audio equipment, boasting advanced technology, exceptional sound quality, and a stylish design. It stands as a testament to Linn’s dedication to elevating the audio experience, making it a worthy investment for anyone serious about their sound.
Top Page Image Contents