Using the PB System

BEFORE POWER ON – A Check List

It is very important that you check the following operational points:

Ventilation

This terminal must NOT be operated in an environment with restricted ventilation. There must be at least 25 mm air clearance around any top or side ventilation holes with a free flow of air around the unit at ALL times for the installation.

Operating Environment

The equipment must not site in direct sunshine, near a heater or in a damp area and must be free from contaminants like dust, smoke or fume.

The equipment must not be operated or stored in extremes of both temperature and humidity/moisture.

(Operating range 0°C to + 35°C and up to 80% relative humidity – non condensing max. wet bulb 26°C)

Power Supply

The operating voltage of the power supply should be checked to confirm that it is set within the range of the local power supply. The power cable, the power outlet and any power fusing arrangements must conform to local safety regulations.

UPS Battery (option)

General care:

The UPS battery is consumable beyond product warranty. Please definitely observe the alerts in beginning of this manual. If the equipment is to be powered off for more than few days, please always disconnect the battery from the system. Reconnect it and turn on the system to recharge the battery for 1 ~ 2 hours every 3 months for temperature lower than 30°C. Recharge for 1 ~ 2 hours every month for temperature over 30°C. Temperature above 40°C must be strictly avoided as it could cause termination of battery life and unexpected result even if the battery is not in work. The UPS battery can support basically the data preservation and smooth running of the system during intermittent or few minutes (3 ~ 20 min. depending on loading and battery condition) power failure.

Battery replacement:

In the preloaded OS for a PB-2200 Pro series, there is a built in utility Posiflex Power Switch Manager that will

indicate the UPS battery status of the battery. When an installed UPS battery is found to be disabled or when pop up warning message like this picture

Part 11

PB2200 specifications

The Aigo PB2200 is a portable power bank designed for modern users who demand efficiency and reliability on-the-go. With a sleek and compact design, this power bank stands out as a versatile solution for charging a variety of devices. Its robust features cater to the needs of both casual users and tech enthusiasts alike.

One of the main highlights of the Aigo PB2200 is its impressive battery capacity, offering up to 22000mAh. This means that it can charge most smartphones several times, with the capability to recharge tablets and other small devices as well. Users can confidently embark on trips or commutes without constantly worrying about their devices running out of power.

The Aigo PB2200 incorporates advanced lithium polymer technology, which enhances its safety and efficiency. This technology minimizes the risk of overheating, ensures stable performance, and extends the lifespan of the power bank. Additionally, it is designed with smart power management features, optimizing the charging process to ensure that devices receive the appropriate amount of power without risk of damage.

In terms of connectivity, the power bank is equipped with multiple output ports, allowing simultaneous charging of multiple devices. This is particularly beneficial for users who require charging for smartphones, tablets, and other electronics. The PB2200 supports both standard USB-A and USB-C outputs, making it compatible with a wide range of devices including the latest smartphones and laptops.

Another remarkable characteristic of the Aigo PB2200 is its compact and lightweight design, making it easy to carry in a backpack or purse. The durable casing and sleek appearance add to its appeal, ensuring that it not only performs well but also looks good doing it.

Moreover, the power bank features LED indicators that display the remaining battery life, giving users a clear idea of how much power is left. This feature is essential for planning charging needs, especially when traveling or when power outlets are not readily available.

In conclusion, the Aigo PB2200 is an essential gadget for anyone who relies heavily on their electronic devices. With its high capacity, efficient charging technologies, multiple output options, and portable design, it stands out as a reliable companion for everyday use and adventurous travels alike.