Cal Spas A726B, A857B, A844L, A826L, A726L, A969L, A844B, A744B, A857L, A826B, A744L manual

Page 25

Light niche and any metallic items in a 5’ (152 cm) radius must be properly bonded with #8 AWG grounding wire.

1.Connect rigid conduit to the 3/4” hub located at the back of the light niche and run to a water resistant junction box (or for 12 volt models to a low voltage transformer) no further than 25’ (7.6m). Remember this is a water cooled light, so the conduit and all connections must be leakproof.

2.Feed the light cord through the rigid conduit to the junction box, leaving at least 4 feet of cord at the end of the light fixture. This slack in the light cord will allow servicing without draining the spa in the future.

3.Wrap light cord slack around back of light housing and attach light to niche with mounting screw.

4.Cut the cord at the junction box, leaving at least 6” (15 cm) of cord to make connections.

5.Strip 6” (15 cm) of the out cord jacket to expose the three insulated wires. Be careful not to damage the insulation on the three inner wires.

6.Connect the three wires to the corresponding circuit wires in the junction box and secure the junction box cover in place.

7.Replace the light assembly in the niche and tighten the special pilot screw.

8.Fill the spa until the underwater light is completely submerged in water before operating the light for more than 10 seconds. Turn on the main switch or circuit breaker, as well as the spa light control, to check for proper operation

Important: Make sure spa light is submerged in at least 18” of water prior to testing.

23

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Page Contents Portable Spa Pre-Delivery Checklist Pre-Delivery and Installation ChecklistIn-Ground Spa Pre-Delivery Checklist Planning the Best Location Allow for service access In-Ground Spa Site Preparation Portable Spa Site PreparationSite Excavation Hard Bottom Grading Prior to ExcavationSite Excavation Sand Bottom Getting the Spa Into Your Yard Check the Dimensions of Your New Cal SpaPlan the Delivery Route Special Circumstances Electrical Requirements Gfci and Wiring RequirementsSee Configuration Instructions on Next Spa Model Gfci Required Wires RequiredTesting the Gfci Breaker Configuring Control SystemGfci Wiring Diagram Volt Electrical Installation RCD and Wiring Requirements Testing the RCD Breaker RCD Wiring Diagram Installing the In-Ground Shell Equipment Pack Plumbing Connections In-Ground Spas Designer Spa SpecificationsDIJ401 DIJ406 DIJ407Page Identifying Plumbing Lines Plumbing ConnectionsAir Test Water TestGate/Slice Valves Connecting Plumbing to Remote EquipmentRemote Equipment Topside Control Panel Electrical and Electronic ConnectionIn-Ground Spa Light Installation Instructions Page Page Pouring the Deck Spa Technical Specifications CL-24 GX-49 39 1/2 450 Page LTR20081024, Rev. B 12/08

A744L, A826B, A857L, A744B, A844B specifications

Cal Spas is renowned for crafting high-quality hot tubs and spas, and among its impressive lineup are the models A857B, A969L, A744L, A826L, and A726L. Each model offers unique features and advanced technologies designed to provide an exceptional spa experience.

The A857B is a luxurious 8-person spa that combines spacious design with powerful hydrotherapy. It features 57 jets, providing an intense massage that targets sore muscles and promotes relaxation. Equipped with advanced LED lighting, the A857B also creates a soothing ambiance for nighttime enjoyment. This model utilizes Cal Spas’ patented Energy Efficient System, which greatly reduces energy consumption while maintaining optimal heating capabilities.

Next in line is the A969L, an elegantly designed 6-person spa that shines in both technology and comfort. The A969L is equipped with 69 jets, including targeted therapy jets that deliver a customizable massage experience. One of its standout features is the Integrated Sound System, allowing users to enjoy their favorite tunes through Bluetooth connectivity. Additionally, the full foam insulation enhances energy efficiency, ensuring that the water remains at the desired temperature without excessive energy usage.

For those seeking a more compact spa, the A744L is an impressive 4-person option that does not compromise on features. With 44 jets strategically placed for maximum comfort, this model is perfect for cozy gatherings. It also includes a waterfall feature for added relaxation and ambiance. The A744L’s sleek design and user-friendly controls make it an excellent choice for smaller backyards or patios.

The A826L model brings a perfect balance of capacity and efficiency. Able to accommodate up to 6 people, the A826L is equipped with 26 jets designed to enhance the hydrotherapy experience. This model also includes a powerful pump system that guarantees consistent performance. Its energy-efficient design ensures that you can enjoy long soak sessions without worrying about soaring energy bills.

Lastly, the A726L offers a unique ergonomic design that provides ample space for 5 to 6 users. With 37 jets, this model focuses on delivering a range of massage styles from gentle to invigorating. The A726L also features a stunning LED lighting system and customizable temperature settings. Its quiet operation ensures a peaceful experience, perfect for relaxation after a long day.

In summary, Cal Spas’ A857B, A969L, A744L, A826L, and A726L models stand out for their exceptional features, advanced technology, and unparalleled comfort. Whether you seek luxury, compactness, or efficiency, each model is designed to elevate your spa experience, making Cal Spas a leading choice in the industry.
Top Page Image Contents