Exmark Metro 21, Metro 26 manual

Page 20

Front wheel height adjustment:

1.Pull the wheel height adjustment lever toward the wheel (Fig. 11) and move it to the desired setting.

FIGURE 11

2. Release the wheel height adjustment lever and set it securely in the notch.

3. Adjust both front wheels to the same cutting height setting.

Rear wheel height adjustment:

1.Pull the rear wheel height adjustment lever outward towards left wheel and move it to the same cutting height setting as the front wheels.

2.Release the rear wheel height adjustment lever and set it securely in the notch.

FIGURE 12

4.3.9Using the Grass Bag

Occasionally, you may wish to use the grass bag for bagging extra long grass, lush grass, or leaves.

Installing the Grass Bag

1.Stop the engine and wait for all moving parts to stop.

2.Open the rear door.

- 15 -

Image 20
Contents For Serial Nos 510,000 & Higher Potential Hazard Exmark Parts PLUS→ Program Operators Manual Table of Contents Safety Safety Alert SymbolTraining PreparationCarbon monoxide can kill you Operation Potential Hazard Maintenance and Storage Safety Signs Specifications Assembly Instructions Oil Capacity Operation InstructionsControls Page PRE-START Operating InstructionsPage Page Cutting Heights Page Potential Hazard Page Maintenance Recommended Maintenance ScheduleWashing Method Scraping MethodPaper Air Filter Screw Paper Air Filter Foam Pre Cleaner Worn or damaged blade can break Page Page Oil may be hot after engine has been run Gasket Page Front Wheel Assembly Rear Wheel Assembly StorageAccessories Troubleshooting Corrective ActionCorrective Action Year Limited Warranty Exmark Turf Equipment For units purchased on or after October 1Page Date Description of Work Done See EXMARK’S Complete Line of Accessories Check us out on the Web